- HOME
- POLYMER SEARCH
- Thermoplastic
- Fluoropolymer
- PTFE
- Polytetrafluoroethylene (PTFE), Glass Filled, Molded
- Fluorseals PTFE 15% glass filled
Fluorseals PTFE 15% glass filled
| Category | Polymer , Thermoplastic , Fluoropolymer , PTFE , Polytetrafluoroethylene (PTFE), Glass Filled, Molded |
| Manufacturer | Fluorseals |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Fluorseals PTFE 15% glass filled.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Improved compressive strength and wear resistance.Information provided by TEKU GmbH Fluorkunststoffe, a distributor of Fluorseals materials.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 2.21 g/cc | 0.0798 lb/in³ | ASTM 1457-62 T |
| Deformation | 10 - 17 % | 10 - 17 % | 14 MPa, 100 h, 23°C; ASTM D621-59 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Ball Indentation Hardness | 29.0 MPa | 4210 psi | ASTM 1457-62 T |
| Tensile Strength at Break | 16.0 MPa | 2320 psi | ASTM 1457-62 T |
| Elongation at Break | 300 % | 300 % | ASTM 1457-62 T |
| Coefficient of Friction, Dynamic | 0.135 - 0.16 | 0.135 - 0.16 | v = 1 m/s |
| 0.14 - 0.18 | 0.14 - 0.18 | v = 1.9 m/s | |
| Abrasion | 2.4 | 2.4 | mm of depth after 200 hrs load duration; Partner Material ST 50 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 110 µm/m-°C @Temperature 100 °C |
61.1 µin/in-°F @Temperature 212 °F |
DIN 52328 |
| Thermal Conductivity | 0.350 W/m-K | 2.43 BTU-in/hr-ft²-°F | DIN 52612 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+16 ohm-cm | 1.00e+16 ohm-cm | DIN 53482 |
| Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | DIN 53482 |
Users viewing this material also viewed the following:
- SABIC Innovative Plastics Lexan® 905AU PC (Asia Pacific)
- Lanxess Durethan® DP 1100/30 H2.0 901510 Nylon 6, Micro Glass Balls
- Lehmann & Voss LUVOCOM® 1105/GF/40/BK-1 PEEK, with glass fiber
- SABIC Innovative Plastics ULTEM CRS5201 PEI (Asia Pacific)
- Teknor Apex Sinvicomp SIC 3704 Polyvinyl Chloride, Rigid
- DSM Stanyl® TE373 Nylon 46 (European and Asian Grade) (Cond)
- DuPont Performance Polymers Delrin® 100T NC010 Acetal (POM) (Unverified Data**)
- Asahi Glass AFLAS® 150CS TFE/P Fluoroelastomer
Copyright © lookpolymers.com All Rights Reserved