Polymer Resources PPX-FR1 Modified PPO, UL 94 V-0 with HDT of 190 F (Unverified Data**)

Category	Polymer , Thermoplastic , Polyphenylene Ether/PPO , Polyphenylene Ether, Molded
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Polymer Resources PPX-FR1 Modified PPO, UL 94 V-0 with HDT of 190 F (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Information provided by Polymer Resources Corporation.

Physical Properties	Metric	English	Comments
Density	1.08 g/cc	0.0390 lb/in³	ASTM D792
Linear Mold Shrinkage	0.0050 - 0.0070 cm/cm	0.0050 - 0.0070 in/in	ASTM D955
Melt Flow	25 - 50 g/10 min	25 - 50 g/10 min	ASTM D1238

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	44.8 MPa	6500 psi	ASTM D638
Tensile Strength, Yield	41.4 MPa	6000 psi	ASTM D638
Flexural Strength	55.2 MPa	8000 psi	ASTM D790
Flexural Modulus	2.07 GPa	300 ksi	ASTM D790
Izod Impact, Notched	2.67 J/cm	5.00 ft-lb/in	ASTM D256
Gardner Impact	>= 16.9 J	>= 12.5 ft-lb	ASTM D3029

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	87.8 °C	190 °F	ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	82.2 °C	180 °F	ASTM D648
Flammability, UL94	V-0	V-0	1/16 in
	V-0	V-0	1/8 in

Processing Properties	Metric	English
Rear Barrel Temperature	216 - 266 °C	420 - 510 °F
Middle Barrel Temperature	227 - 271 °C	440 - 520 °F
Front Barrel Temperature	238 - 277 °C	460 - 530 °F
Melt Temperature	246 - 274 °C	475 - 525 °F
Mold Temperature	54.4 - 76.7 °C	130 - 170 °F
Drying Temperature	71.1 - 82.2 °C	160 - 180 °F
Dry Time	3 - 4 hour	3 - 4 hour

Users viewing this material also viewed the following: