PolyOne OnFlex™ S KE 40A-3S1727 Thermoplastic Elastomer (TPE)

Category	Polymer , Thermoplastic , Elastomer, TPE
Manufacturer	PolyOne Corporation
Trade Name	OnFlex™
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	PolyOne OnFlex™ S KE 40A-3S1727 Thermoplastic Elastomer (TPE).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

OnFlex™-S KE thermoplastic elastomer compounds are based on hydrogenated styrenic block copolymers. This range of compounds are specially compatabilized to provide excellent adhesion to a variety polar substrates including PC, ABS, PC/ABS, ASA and PVC. OnFlex-S KE compounds can be processed by 2K molding or overmoulding, insert moulding or co-extrusion. In addition to this OnFlex-S KE compounds are formulated to provide good compression set performance, even at elevated temperatures, good processability, a wide hardness range, low temperature flexibility, good scratch resistance, good colourability and surface appearance, and excellent mechanical properties.Properties are measured using injection molded plaques. Compression Set values are for parts annealed for 24 hours at 100°C.Information provided by PolyOne

Physical Properties	Metric	English	Comments
Density	1.06 g/cc	0.0383 lb/in³	ISO 1183

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	40	40	ISO 868
Tensile Strength at Break	3.60 MPa	522 psi	ISO 37
Tensile Stress	1.20 MPa @Strain 100 %	174 psi @Strain 100 %	ISO 37
	2.80 MPa @Strain 300 %	406 psi @Strain 300 %	ISO 37
Elongation at Break	300 %	300 %	ISO 37
Tear Strength	13.0 kN/m	74.2 pli	ISO 34-1
Compression Set	38 % @Temperature 23.0 °C, Time 259000 sec	38 % @Temperature 73.4 °F, Time 72.0 hour	ISO 815
	51 % @Temperature 70.0 °C, Time 79200 sec	51 % @Temperature 158 °F, Time 22.0 hour	ISO 815
	72 % @Temperature 100 °C, Time 79200 sec	72 % @Temperature 212 °F, Time 22.0 hour	ISO 815

Processing Properties	Metric	English
Melt Temperature	200 - 230 °C	392 - 446 °F
Mold Temperature	20.0 - 40.0 °C	68.0 - 104 °F
Drying Temperature	100 °C	212 °F
Dry Time	2.00 hour	2.00 hour

Descriptive Properties	Value	Comments
Features	Good Adhesion
	Scratch Resistant
Forms	Pellets
Generic Material	TPE
Generic Material Type	Styrenic Thermoplastic Elastomer (TES)
Generic Name	Thermoplastic Elastomer (TPE)
Injection Rate	Slow-Moderate
Manufacturer / Supplier	GLS Thermoplastic Elastomers
Processing Method	Coextrusion
	Multi Injection Molding
Regional Availability	Africa & Middle East
	Asia Pacific
	Europe
	North America
	South America
RoHS Compliance	RoHS Compliant
Uses	Automotive Applications
	Consumer Applications
	Industrial Applications
	Overmolding
	Power/Other Tools

Users viewing this material also viewed the following: