- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyphenylene Sulfide (PPS)
- Polyphenylene Sulfide (PPS), Mineral/Glass-Fiber Filled
- PolyOne Edgetek® SF-40GF-25MN1/000 PPS (Polyphenylene Sulfide), 40% Glass Fiber and 25% Mineral Filled (disco
PolyOne Edgetek® SF-40GF-25MN1/000 PPS (Polyphenylene Sulfide), 40% Glass Fiber and 25% Mineral Filled (disco
| Category | Polymer , Thermoplastic , Polyphenylene Sulfide (PPS) , Polyphenylene Sulfide (PPS), Mineral/Glass-Fiber Filled |
| Manufacturer | |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | PolyOne Edgetek® SF-40GF-25MN1/000 PPS (Polyphenylene Sulfide), 40% Glass Fiber and 25% Mineral Filled
(disco.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by PolyOne™ Corporation
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.98 g/cc | 1.98 g/cc | ASTM D792 |
| Water Absorption | 0.030 % | 0.030 % | 24 Hr; ASTM D570 |
| Linear Mold Shrinkage | 0.0010 - 0.0020 cm/cm | 0.0010 - 0.0020 in/in | ASTM D955 |
| Ash | 65 % | 65 % | ASTM D2584 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 117 MPa | 17000 psi | ASTM D638 |
| Elongation at Break | 1.0 % | 1.0 % | ASTM D638 |
| Tensile Modulus | 24.1 GPa | 3500 ksi | ASTM D638 |
| Flexural Strength | 172 MPa | 25000 psi | ASTM D790 |
| Flexural Modulus | 22.8 GPa | 3300 ksi | ASTM D790 |
| Izod Impact, Notched | 0.374 J/cm | 0.700 ft-lb/in | ASTM D648 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 1.8 MPa (264 psi) | 271 °C | 520 °F | ASTM D648 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 299 - 332 °C | 570 - 630 °F | |
| Mold Temperature | 121 - 149 °C | 250 - 300 °F | |
| Drying Temperature | 121 °C | 250 °F |
Users viewing this material also viewed the following:
- Murtfeldt Murdopol® Nylon 12
- Akro-Plastic Akromid® S31 (3484) PA 6.10 Conditioned (discontinued **)
- Sylvin Technologies 9812A-90 Natural PVC for Injection Molding
- Taiwan Sheen Soon Sheenthane® AH-810 TPU for Hotmelt Adhesive
- SABIC Innovative Plastics Ultem DT1810E PEI Blend (Asia Pacific)
- ExxonMobil Metallyte™ 18MM882 OPP Film
- Denka VINYKON W4203 PVC, W grade for equipment cords, for heat resistance
- 3M 2393 Premium High Temperature Masking Tape
- BASF Ultramid® B3EG6 30% Glass Filled PA6 (Conditioned)
- 3M Scotchgard™ Resilient Floor Protector
Copyright © lookpolymers.com All Rights Reserved