- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyphthalamide (PPA)
- Polyphthalamide (PPA), 50% Glass Fiber Reinforced
- PolyOne Edgetek® AM-45GF/000 PPA (Polyphthalamide), 45% Glass Fiber Reinforced, Hi-Temp (discontinued **)
PolyOne Edgetek® AM-45GF/000 PPA (Polyphthalamide), 45% Glass Fiber Reinforced, Hi-Temp (discontinued **)
| Category | Polymer , Thermoplastic , Polyphthalamide (PPA) , Polyphthalamide (PPA), 50% Glass Fiber Reinforced |
| Manufacturer | |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | PolyOne Edgetek® AM-45GF/000 PPA (Polyphthalamide), 45% Glass Fiber Reinforced, Hi-Temp
(discontinued **).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by PolyOne™ Corporation
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.58 g/cc | 1.58 g/cc | ASTM D792 |
| Water Absorption | 0.25 % @Thickness 3.17 mm |
0.25 % @Thickness 0.125 in |
24 hr. Immersion; ASTM D570 |
| Linear Mold Shrinkage | 0.0020 - 0.0030 cm/cm | 0.0020 - 0.0030 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 257 MPa | 37300 psi | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
| Elongation at Break | 1.0 - 3.0 % | 1.0 - 3.0 % | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
| Tensile Modulus | 17.2 GPa | 2500 ksi | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
| Flexural Strength | 310 MPa | 45000 psi | ASTM D790 |
| Flexural Modulus | 13.8 GPa | 2000 ksi | ASTM D790 |
| Izod Impact, Notched | 1.33 J/cm | 2.50 ft-lb/in | Method A, Injection Molded, 0.125 in bars, 73°F; ASTM D648 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 1.8 MPa (264 psi) | 302 °C | 575 °F | Unannealed, 0.125 in bars; ASTM D648 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 321 - 349 °C | 610 - 660 °F | Molding |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Processing Method | Injection Molding |
Users viewing this material also viewed the following:
- Nye Lubricants 1252 Grease
- NCMT NanoPAC™ S202 High Performance Polypropylene Nanocomposite
- Network Polymers NPP 20-1001 C/AS
- Polykemi AB SCANBLEND P AP2060 F30 PBT/ASA, Glass Fiber Reinforced
- ICO Polymers ICOFLOâ„¢ 510-5054 800 Micron LDPE Powder
- SABIC Innovative Plastics LNP LUBRICOMP WFL36 PBT (Europe-Africa-Middle East)
- China Tungsten YG6X Tungsten Carbide for Cutting Tools
- BASF Styroclear GH 58 SBC
- A. Schulman FORMION™ FI 389 Ionomer
- DuPont Performance Polymers Neoprene TRT Polychloroprene Rubber (discontinued **)
Copyright © lookpolymers.com All Rights Reserved