POLYMER SEARCH

Parkway Products Thixomolded® AM60A Magnesium

Category	Metal , Nonferrous Metal , Magnesium Alloy
Manufacturer	Parkway Products
Trade Name	Thixomolded®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Parkway Products Thixomolded® AM60A Magnesium.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Thixomolding® is a fabrication technique, similar to injection molding, that uses magnesium alloys as the “resin” instead of plastic. Solid magnesium alloy pellets are fed into the machine, heated to high temperatures and injected into a closed die / mold. Parts from the machine usually need no additional machining, finishing or puttying.Information provided by Parkway Products.

Physical Properties	Metric	English
Density	1.80 g/cc	0.0650 lb/in³
Porosity	0.0 - 1.1 %	0.0 - 1.1 %
	0.0 - 1.10 %	0.0 - 1.10 %

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell E	74	74
Tensile Strength, Ultimate	221 MPa	32000 psi
Tensile Strength, Yield	131 MPa	19000 psi
Elongation at Break	4.0 %	4.0 %
Modulus of Elasticity	44.8 GPa	6500 ksi
Poissons Ratio	0.35	0.35
Shear Modulus	17.0 GPa	2470 ksi	calculated
Impact Test	6.10 J	4.50 ft-lb

Thermal Properties	Metric	English
CTE, linear	25.6 µm/m-°C @Temperature 21.1 °C	14.2 µin/in-°F @Temperature 70.0 °F
Specific Heat Capacity	1.05 J/g-°C	0.250 BTU/lb-°F
Thermal Conductivity	62.0 W/m-K	430 BTU-in/hr-ft²-°F
Melting Point	616 °C	1140 °F
Deflection Temperature at 1.8 MPa (264 psi)	>= 371 °C	>= 700 °F

Component Elements Properties	Metric	English	Comments
Aluminum, Al	5.5 - 6.5 %	5.5 - 6.5 %
Copper, Cu	<= 0.35 %	<= 0.35 %
Magnesium, Mg	94 %	94 %	As Remainder
Manganese, Mn	0.13 - 0.60 %	0.13 - 0.60 %
Nickel, Ni	<= 0.030 %	<= 0.030 %
Silicon, Si	<= 0.50 %	<= 0.50 %
Zinc, Zn	<= 0.22 %	<= 0.22 %

Electrical Properties	Metric	English	Comments
Electrical Resistivity	0.0000100 ohm-cm	0.0000100 ohm-cm

Descriptive Properties	Value	Comments
Across Parting Line Dimensions	+ 0.0015 in	Tolerance (0 - 10 in<sup>2</sup>)
	+ 0.0025 in	Tolerance (11 - 20 in<sup>2</sup>)
	+ 0.004 in	Tolerance (21 - 50 in<sup>2</sup>)
	+ 0.006 in	Tolerance (51 - 100 in<sup>2</sup>)
Flatness Across Largest Dimension	+/- 0.001 in	Tolerance (each inch beyond 1 in)
	+/- 0.002 in	Tolerance (0 - 3 in)
Ignition Temperature at One Atmosphere	>900°F
Linear Dimension in same Die Half	+/- 0.0005 in	Tolerance (0 to 1 in)
	+/- 0.0010 in	Tolerance (each inch beyond 1 in)
Mil 117B Salt Spray Corrosion	4 Mils per Year
Moving Die Component Tolerances	+ 0.004 in	Tolerance (0 - 10 in<sup>2</sup>)
	+ 0.006 in	Tolerance (11 - 20 in<sup>2</sup>)
	+ 0.008 in	Tolerance (21 - 50 in<sup>2</sup>)
	+ 0.010 in	Tolerance (51 - 100 in<sup>2</sup>)
Shielding Effectiveness 0.020" thk	>85 dB	100MHz
Shielding Effectiveness 0.050" thk	>88 dB	100MHz
Surface Finish	32 RMS or better
Thickness	0.015 - 2.0 in
UL94 Flame Exposure Results	DNB

Users viewing this material also viewed the following: