Parker Chomerics CHO-SEAL L6303 Conductive Elastomer

Category	Polymer , Thermoset , Fluoropolymer, TS , Rubber or Thermoset Elastomer (TSE)
Manufacturer	Parker Chomerics
Trade Name	CHO-SEAL
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Parker Chomerics CHO-SEAL L6303 Conductive Elastomer.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Good performance in moderately corrosive environments; material of choice for flange finishes needing “bite-through” for good electrical contact.Molded and ExtrudedRoHS CompliantInformation provided by Chomerics

Physical Properties	Metric	English	Comments
Specific Gravity	1.95 - 2.45 g/cc	1.95 - 2.45 g/cc	ASTM D792

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	55 - 75	55 - 75	ASTM D2240
Tensile Strength at Break	>= 1.03 MPa	>= 150 psi	ASTM D412
Elongation at Break	>= 60 %	>= 60 %	ASTM D412
Tear Strength	6.13 kN/m	35.0 pli	ASTM D624
Compression Set	<= 25 % @Temperature 100 °C, Time 252000 sec	<= 25 % @Temperature 212 °F, Time 70.0 hour	ASTM D395 Method B

Thermal Properties	Metric	English	Comments
Thermal Conductivity	0.800 W/m-K @Pressure 2.07 MPa	5.55 BTU-in/hr-ft²-°F @Pressure 300 psi	ASTM D5470
Maximum Service Temperature, Air	150 °C	302 °F
Minimum Service Temperature, Air	-45.0 °C	-49.0 °F	Flex TR10; ASTM D1329

Electrical Properties	Metric	English	Comments
Volume Resistivity	0.10 ohm-cm	0.10 ohm-cm	as supplied without pressure sensitive adhesive; CEPS-0002
Shielding Effectiveness	>= 100 dB @Frequency 1.00e+8 Hz	>= 100 dB @Frequency 1.00e+8 Hz	CHO-TM-TP08
	>= 100 dB @Frequency 5.00e+8 Hz	>= 100 dB @Frequency 5.00e+8 Hz	CHO-TM-TP08
	>= 100 dB @Frequency 2.00e+9 Hz	>= 100 dB @Frequency 2.00e+9 Hz	CHO-TM-TP08
	>= 100 dB @Frequency 1.00e+10 Hz	>= 100 dB @Frequency 1.00e+10 Hz	CHO-TM-TP08

Descriptive Properties	Value	Comments
Binder	Fluoro-silicone
Filler	Ni/C
Heat Aging	<0.25 ohm-cm	125°C for 48 hrs; CEPS-0002

Users viewing this material also viewed the following: