- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- HDPE
- High Density Polyethylene (HDPE), Injection Molded
- Network Polymers NPP 50-0151
Network Polymers NPP 50-0151
| Category | Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Injection Molded |
| Manufacturer | Network Polymers |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Network Polymers NPP 50-0151.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: High Density Polyethylene (HDPE)Information provided by Network Polymers Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.951 g/cc | 0.0344 lb/in³ | ASTM D1505 |
| High Load Melt Index | 11.5 g/10 min @Load 21.6 kg, Temperature 190 °C |
11.5 g/10 min @Load 47.6 lb, Temperature 374 °F |
Procedure A Condition F (HLMI); ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 26.5 MPa | 3840 psi | chs 2 in/min; ASTM D638 |
| Elongation at Break | >= 600 % | >= 600 % | chs 2 in/min; ASTM D638 |
| Flexural Modulus | 1.17 GPa | 170 ksi | ASTM D790 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 73.0 °C | 163 °F | ASTM D1525 |
| Brittleness Temperature | <= -76.1 °C | <= -105 °F | ASTM D746 |
Users viewing this material also viewed the following:
- Plastcom SLOVALEN PC 51 C 40 Polypropylene Homopolymer and Copolymer, 40% Micronized Talc
- Polimeros Mexicanos Rotolene® Natural Linear Medium Density Polyethylene
- SABIC Innovative Plastics Lexan® SP7604 PC (Asia Pacific)
- Industeel CLC 1.2738 Prehardened Mold Steel (300HB/30HRC) for Thick Sections
- Multibase Multibatch® MP 53658 Sheet Extrusion
- Arlon 32980XA015 0.015" Uncured Silicone Rubber on Polyester Film
- 3M Scotchcal™ ElectroCut™ 7125-177 Graphic Film
- LATI LARTON CE/60 60% Special Mineral Filled Polyphenylene sulfide (PPS) (Unverified Data**)
- Haynes 625 alloy, 10% cold reduction, 1120°C anneal for 5 minutes
Copyright © lookpolymers.com All Rights Reserved