- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Thermoplastic Elastomer, Melt-Processible Rubber
- Multibase Multi-Flex® TPE A 8802 BLK
Multibase Multi-Flex® TPE A 8802 BLK
| Category | Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Elastomer, Melt-Processible Rubber |
| Manufacturer | Multibase |
| Trade Name | Multi-Flex® TPE |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Multibase Multi-Flex® TPE A 8802 BLK.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Multi-Flex TPE contains Kraton™ G.Data provided by Multibase.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.07 g/cc | 0.0387 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.0108 cm/cm | 0.0108 in/in | ASTM D955 |
| Melt Flow | 1.8 g/10 min | 1.8 g/10 min | (Condition L) ASTM D-1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 88 | 88 | 10 sec; ASTM D-2240 |
| Tensile Strength, Ultimate | 9.00 MPa | 1310 psi | ASTM D412 |
| Elongation at Break | 700 % | 700 % | ASTM D412 |
| Flexural Modulus | 0.00220 GPa | 0.319 ksi | method 1, Proc.B; ASTM D-790 |
| Tear Strength | 5.50 kN/m | 31.4 pli | ASTM D624 |
Users viewing this material also viewed the following:
- Plastcom SLOVALEN PC 63 T 15 PP reinforced with 15% mineral filler
- MV Labs RB400 RbCl Rubidium chloride
- Polimeri Europa Riblene® MR 30 Low Density Polyethylene - Injection Molding
- Pinnacle Polymers 1120 H Polypropylene Homopolymer, Injection Molding Grade, Nucleated, with Antistat
- Inno-Comp INNOPOL® CS 2-3302 Elastomer Modified Polypropylene Block-Copolymer
- UBE UBEPOL BR130B Non-Oil Extended Synthetic Rubber Vulcanizate (Cured 50 Minutes at 145°C)
- Chengdu Polyster H5550 Thermoplastic Polyether-ester Elastomer (TPEE)
- Chesterton ARC MX1 Vertical Build Extreme Wear Compound
- Chosun Refractories A-5 Insulating Firebrick
Copyright © lookpolymers.com All Rights Reserved