- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Thermoplastic Elastomer, Melt-Processible Rubber
- Multibase Multi-Flex® TPE A 7606 GREY
Multibase Multi-Flex® TPE A 7606 GREY
| Category | Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Elastomer, Melt-Processible Rubber |
| Manufacturer | Multibase |
| Trade Name | Multi-Flex® TPE |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Multibase Multi-Flex® TPE A 7606 GREY.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
The burn rate is 1 in/min (25 mm/min) based on ASTM FM VSS 302. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.910 g/cc | 0.0329 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.016 cm/cm | 0.016 in/in | ASTM D955 |
| Melt Flow | 1.3 g/10 min | 1.3 g/10 min | (Condition L) ASTM D-1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 73 | 73 | 10 sec; ASTM D-2240 |
| Tensile Strength, Ultimate | >= 1.17 MPa | >= 170 psi | ASTM D412 |
| Elongation at Break | >= 400 % | >= 400 % | ASTM D412 |
| Tear Strength | >= 39.4 kN/m | >= 225 pli | ASTM D624 |
Users viewing this material also viewed the following:
- Omnia Plastica PE 1000 - Polyethylene 1000
- Pacific Sintered Materials FN-253-T(HT) 4600 Powdered Metal
- ExxonMobil LD 051.LT Shrink Film Resin (discontinued **)
- Gouda Vuurvast CURAS 40 PD Moldable Refractory Material
- Techmer ES Plastiblend® PC/PBT IM 6200 BK
- Teknor Apex Telcar® TL-2540F Thermoplastic Elastomer
- ChevronTexaco 800 NC Open Gear Lubricant
- Cossa Polimeri ESTASTIR HI 1012 Polystyrene
- GEHR Plastics Noryl PPO-30 GF 30% Glass Filled (discontinued **)
Copyright © lookpolymers.com All Rights Reserved