- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Thermoplastic Elastomer, Melt-Processible Rubber
- Multibase Multi-Flex® TPE A 6404 BLK
Multibase Multi-Flex® TPE A 6404 BLK
| Category | Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Elastomer, Melt-Processible Rubber |
| Manufacturer | Multibase |
| Trade Name | Multi-Flex® TPE |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Multibase Multi-Flex® TPE A 6404 BLK.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Ash is 41%. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.231 g/cc | 0.04447 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.016 cm/cm | 0.016 in/in | ASTM D955 |
| Melt Flow | 21 g/10 min | 21 g/10 min | (Condition L) ASTM D-1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 59 | 59 | 10 sec; ASTM D-2240 |
| Tensile Strength, Ultimate | 3.80 MPa | 551 psi | ASTM D412 |
| Elongation at Break | 631 % | 631 % | ASTM D412 |
| Flexural Modulus | 0.0120 GPa | 1.74 ksi | method 1, Proc.B; ASTM D-790 |
| Tear Strength | 21.7 kN/m | 124 pli | ASTM D624 |
Users viewing this material also viewed the following:
- Premix Premi-Glas® 2204-20 CR-SX Fiberglass Reinforced Thermoset SMC
- LG Chemical NBR 7150 High Acrylonitrile Polymer
- Saint-Gobain Meldin® 7211 CM Compression Molded Graphite and PTFE Filled Polyimide
- A. Schulman SCHULAMID® 66 MK20HI 20% Mineral Reinforced, Impact Modified Nylon 66
- Ecomass® 1007ZC85 Stainless Steel Filled COPA
- Parker Chomerics CHO-SHIELD® 1085 Silicone Adhesive Primer
- Total ESD 201 B HDPE blow molding
- PlastxWorld Veroplas PA2002HI Nylon 6
Copyright © lookpolymers.com All Rights Reserved