- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Thermoplastic Elastomer, Melt-Processible Rubber
- Multibase Multi-Flex® TPE A 6221 E UV BLK
Multibase Multi-Flex® TPE A 6221 E UV BLK
| Category | Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Elastomer, Melt-Processible Rubber |
| Manufacturer | Multibase |
| Trade Name | Multi-Flex® TPE |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Multibase Multi-Flex® TPE A 6221 E UV BLK.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
The burn rate is 1 in/min (25 mm/min) based on ASTM FM VSS 302. Multi-Flex TPE contains Kratonâ„¢ G.Data provided by Multibase.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.20 g/cc | 0.0434 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.014 cm/cm | 0.014 in/in | ASTM D955 |
| Melt Flow | 2.5 - 5.0 g/10 min | 2.5 - 5.0 g/10 min | (Condition L) ASTM D-1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 59 | 59 | 10 sec; ASTM D-2240 |
| Tensile Strength, Ultimate | >= 4.00 MPa | >= 580 psi | ASTM D412 |
| Elongation at Break | >= 700 % | >= 700 % | ASTM D412 |
| Flexural Modulus | 0.0345 GPa | 5.00 ksi | method 1, Proc.B; ASTM D-790 |
| Tear Strength | >= 22.77 kN/m | >= 129.9 pli | ASTM D624 |
Users viewing this material also viewed the following:
- RheTech Products T40P108-01A 40% Talc Reinforced Polypropylene, Black
- SABIC Innovative Plastics LNP THERMOCOMP DF006HL PC
- Techmer ES Plaslube® J-1/CF/10/TF/20 BK PA66
- Teknor Apex Monprene® MP-1855PV2 Thermoplastic Elastomer
- Plenco 6582 Phenolic, Briquette, Transfer Molded
- DSM Akulon® K225-KWS (Cond.) Nylon 6 (North America)
- Daikin POLYFLON D-1E PTFE Dispersion
- Dow Nordel® IP 4770R General Purpose Compound
- DuPont Teijin Films Mylar® M34 Polyester Film, 75 Gauge (20 µm), PVDC Coated
Copyright © lookpolymers.com All Rights Reserved