- HOME
- POLYMER SEARCH
- Thermoset
- Silicone
- Silicone, RTV, Adhesive/Sealant Grade
- Momentive Performance Materials RTV6708 Translucent Adhesive Sealant, General Purpose Paste
Momentive Performance Materials RTV6708 Translucent Adhesive Sealant, General Purpose Paste
| Category | Polymer , Adhesive , Thermoset , Silicone , Silicone, RTV, Adhesive/Sealant Grade |
| Manufacturer | Momentive Performance Materials (Former GE Silicones) |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Momentive Performance Materials RTV6708 Translucent Adhesive Sealant, General Purpose Paste.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
One-part modified alkoxy cure. Modified alkoxy materials cure at room temperature and will outgas a small amount of ammonia and some alcohol during cure. Typical uses: General purpose adhesive sealant. Long tooling time. Primerless adhesion to many metals and plastics.Data provided by the manufacturer, GE Silicones.GE Silicones became a part of Momentive Performance Materials in 2006.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.04 g/cc | 0.0376 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 18 | 18 | |
| Tensile Strength, Ultimate | 1.57 MPa | 228 psi | |
| Elongation at Break | 450 % | 450 % | |
| Adhesive Bond Strength | 0.930 MPa | 135 psi | Typical lap shear |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 205 °C | 401 °F | Continuous useful temperature. |
| Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | Continuous useful temperature. |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Constant | 2.9 @Frequency 100 Hz |
2.9 @Frequency 100 Hz |
|
| Dielectric Strength | 16.0 kV/mm | 406 kV/in |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 25.0 °C | 77.0 °F |
Users viewing this material also viewed the following:
- ExxonMobil LL 8450 Rotational Molding Resin (discontinued **)
- Solvay Specialty Polymers Polymist® XPP 515-S Polytetrafluoroethylene (PTFE)
- Master Bond EP30HT-LO NASA Low Outgassing, Optically Clear Coating
- A. Schulman POLYBATCH™ 7171 POLYBATCH® Concentrate Based In Polyethylene
- Washington Penn Homopolymer Polypropylene 40% Talc Filled
- Plenco 6401 Phenolic, Briquette, Injection Molded
- DuPont Performance Polymers Zytel® 103HSL BKB080 Nylon 66 (Unverified Data**)
- 3M 3380 General Purpose Aluminum Foil Tape
- Aptek 6505PMF Electronic-grade, non-conductive adhesive
Copyright © lookpolymers.com All Rights Reserved