- HOME
- POLYMER SEARCH
- Thermoset
- Silicone
- Silicone, RTV, Adhesive/Sealant Grade
- Momentive Performance Materials RTV167 Gray Adhesive Sealant, Non-Corrosive High Strength
Momentive Performance Materials RTV167 Gray Adhesive Sealant, Non-Corrosive High Strength
| Category | Polymer , Adhesive , Thermoset , Silicone , Silicone, RTV, Adhesive/Sealant Grade |
| Manufacturer | Momentive Performance Materials (Former GE Silicones) |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Momentive Performance Materials RTV167 Gray Adhesive Sealant, Non-Corrosive High Strength.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
One-part totally non-corrosive alkoxy cure. Alkoxy cure silicones are neutral cure materials that offer exceptional adhesion and are non-corrosive to most metals. Typical uses: Highest strength adhesive sealant for mechanical and electrical applications. Use on horizontal or vertical surfaces. Excellent electrical insulator.Data provided by the manufacturer, GE Silicones.GE Silicones became a part of Momentive Performance Materials in 2006.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.12 g/cc | 0.0405 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 37 | 37 | |
| Tensile Strength, Ultimate | 5.49 MPa | 796 psi | |
| Elongation at Break | 600 % | 600 % | |
| Adhesive Bond Strength | 1.38 MPa | 200 psi | Typical lap shear |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 205 °C | 401 °F | Continuous useful temperature. |
| Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | Continuous useful temperature. |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Constant | 2.8 @Frequency 60 Hz |
2.8 @Frequency 60 Hz |
|
| Dielectric Strength | 20.0 kV/mm | 508 kV/in |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 25.0 °C | 77.0 °F |
Users viewing this material also viewed the following:
- S&E Specialty Polymers GPP6100-116C PP
- Polykemi AB POLYblend 45V PC/ABS-blend, Flame Retardant
- Kraton® G1657 + PP blend + Talc (12/21/67)
- Shin-Etsu Silicones X-33-514 Silicone Primer
- Stellar Canada CERAMITE® BCR Wear Resistant Castable
- A. Schulman PP 828-01 Polypropylene Molding Grade Impact Polypropylene
- Eagle Brass 302 Austenitic Stainless Steel, 1/2 Hardened
- ChevronTexaco Aero SAE 60/Grade 120 Engine Oil AD
- Ametek Ultra 304L P/M Stainless Steel, Sintered from 6.75 g/cc Green Density
Copyright © lookpolymers.com All Rights Reserved