- HOME
- POLYMER SEARCH
- Glass
- Glass Ceramic
- Möller Medical PolySkin 98 S NanoCoating
Möller Medical PolySkin 98 S NanoCoating
| Category | Ceramic , Glass , Glass Ceramic , Other Engineering Material , Ceramic/Metallic Coating |
| Manufacturer | Moeller Medical (Möller Medical) |
| Trade Name | PolySkin |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Möller Medical PolySkin 98 S NanoCoating.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Flexible, non-abrasive "soft feel" coating with velour-like surface.Information provided by Möller Medical, Member of CENTROTEC Group
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Thickness | 40.0 - 80.0 microns | 1.57 - 3.15 mil |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Taber Abrasion, mg/1000 Cycles | 0.00 | 0.00 | CS17 friction disc with 500g load; DIN 53754 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 200 °C | 392 °F |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 180 °C | 356 °F | Hardening Temperature |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Applicable Substrate | Aluminum | |
| Brass | ||
| Copper | ||
| Glass | with restrictions | |
| Stainless Steel | ||
| Contact Angle to Water [deg] | 98 | |
| Cupping Test [mm] | 8.8 | DIN EN ISO 1520 |
| Non-Applicable Substrate | ABS | |
| Nylon | ||
| PMMA | ||
| Polycarbonate | ||
| Tubes int. dia. 0.1-10 mm | ||
| Pendulum Dampening Test [sec] | 100-115 | DIN EN ISO 1522 |
Users viewing this material also viewed the following:
- P & P Technology Monex Expanded Monel Foil
- Ravago Manufacturing Americas Hysun™ A6020 ASA+PC
- Arkema Group Oroglas® HFI-7 Acrylic (discontinued **)
- Kolon KOPA® KN333G33CR G/F Reinforced Nylon 66
- SABIC Innovative Plastics LNP Thermocomp MX05038 PP (Europe-Africa-Middle East)
- Samsung Cheil Industries Infino® SC-1220UR PC, Unreinforced
- Samsung Cheil Industries Starex® BM-0320 J ABS, Unreinforced
- SABIC Innovative Plastics LNP VERTON RVL36 PA 66 (Europe-Africa-Middle East)
- Huntsman Rexell® H2104 Injection Molding LLDPE (discontinued **)
Copyright © lookpolymers.com All Rights Reserved