- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- Micropol Microstat ML21 Linear medium density static dissipative polyethylene
Micropol Microstat ML21 Linear medium density static dissipative polyethylene
| Category | Polymer , Thermoplastic , Polyethylene (PE) |
| Manufacturer | Micropol Limited |
| Trade Name | Microstat |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Micropol Microstat ML21 Linear medium density static dissipative polyethylene.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by Micropol Limited
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.936 g/cc | 0.0338 lb/in³ | ASTM D792-91 |
| Melt Flow | 7.0 - 9.0 g/10 min | 7.0 - 9.0 g/10 min | ASTM D1238-94 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 16.0 MPa | 2320 psi | 50mm/min; ASTM D638M-89 |
| Elongation at Break | 350 % | 350 % | ASTM D638-M89 |
| Flexural Modulus | 0.560 GPa | 81.2 ksi | ASTM D790-M86 |
| Izod Impact, Notched | 0.900 J/cm @Temperature -20.0 °C |
1.69 ft-lb/in @Temperature -4.00 °F |
ASTM D256A |
| 1.20 J/cm @Temperature 23.0 °C |
2.25 ft-lb/in @Temperature 73.4 °F |
ASTM D256A |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Vicat Softening Point | 111 °C | 232 °F | 5 kilo load; ASTM D1525 |
| Brittleness Temperature | <= -70.0 °C | <= -94.0 °F | ASTM D746 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 8.00e+6 ohm-cm | 8.00e+6 ohm-cm | IEC 93 |
| Surface Resistance | 2.20e+7 ohm | 2.20e+7 ohm | IEC 93 |
Users viewing this material also viewed the following:
- Polykemi AB POLYfill PP CQX10030E10 Polypropylene, Mineral Reinforced, Elastomer Modified
- Materion Beryllium Copper Alloy M25 Rod and Bar; AT (TF00) Temper; up to 76 mm (UNS C17300)
- Lucite International Colacryl ® LS200 Specialty Acrylic Resin
- Teknor Apex APEX® 3202-70 Polyvinyl Chloride, Flexible
- Westlake Tymax™ GA7501 Anhydride Modified Acrylate Copolymer (Developmental)
- Hexcel® HexWeb® HRP/OX - 3/8 - 5.5 Fiberglass/Phenolic Honeycomb
- Diamond Polymers NYLON 6650HSL Black
- Ashley Polymers Ashlene® 525 Nylon 66
- Overview of materials for Epoxy Molding Compound
Copyright © lookpolymers.com All Rights Reserved