Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Menzolit Menzolit® SMC 1100 Unsaturated Polyester UP

Category Polymer , Thermoset , Polyester, TS , Thermoset Polyester Glass SMC
Manufacturer Menzolit
Trade Name Menzolit®
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Menzolit Menzolit® SMC 1100 Unsaturated Polyester UP.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
SMC 1100 is a special vinylester SMC for high strength applications. The reinforcement has been put to a level that combines mouldability with high strength and stiffness properties. The specific resin and a higher amount of glass fibers results in high mechanical strength. Durability is improved as well. Even without a specific fire retardant, the fire retardancy level HB according UL 94 is achieved. Typical applictions are structural components within the automotive industry or mechanical engineering. It is suitable for load carrying applications or fast moving and accelerated components.Information Provided by Menzolit
Physical Properties Metric English Comments
Density 1.80 g/cc
0.0650 lb/in³
ISO 1183
Water Absorption <= 0.30 %
<= 0.30 %
ISO 62
Linear Mold Shrinkage 0.00040 cm/cm
0.00040 in/in
ISO 2577
Mechanical Properties Metric English Comments
Tensile Strength, Ultimate 150 MPa

@Temperature 22.0 °C
 21800 psi

@Temperature 71.6 °F
 25mm flat samples, compression moulded; ISO 527-4
Tensile Strength, Yield 150 MPa

@Temperature 22.0 °C
 21800 psi

@Temperature 71.6 °F
 25mm flat samples, compression moulded; ISO 527-4
Elongation at Yield 1.6 %
1.6 %
tensile rupture strain; ISO 527-4
Modulus of Elasticity 13.0 GPa
1890 ksi
25mm flat samples, compression moulded; ISO 527-4
Flexural Strength 280 MPa

@Temperature 22.0 °C
 40600 psi

@Temperature 71.6 °F
 25 mm wide 100 mm long, flat samples; ISO 14125
Flexural Modulus 13.0 GPa

@Temperature 22.0 °C
 1890 ksi

@Temperature 71.6 °F
 25 mm wide 100 mm long, flat samples; ISO 14125
Compressive Yield Strength 120 MPa
17400 psi
ISO 14126
Poissons Ratio 0.30
0.30
Shear Modulus 5.00 GPa
725 ksi
in plane
Charpy Impact, Notched 12.8 J/cm²
60.9 ft-lb/in²
ISO 179
Thermal Properties Metric English Comments
CTE, linear 12.0 µm/m-°C
6.67 µin/in-°F
ISO 11359-2
Specific Heat Capacity 1.10 J/g-°C
0.263 BTU/lb-°F
Thermal Conductivity 0.700 W/m-K
4.86 BTU-in/hr-ft²-°F
Maximum Service Temperature, Air 170 °C
338 °F
Deflection Temperature at 1.8 MPa (264 psi) >= 200 °C
>= 392 °F
ISO 75-2
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
Glass Transition Temp, Tg 162 °C
324 °F
ISO 11357-2
Flammability, UL94 HB

@Thickness 3.00 mm
 HB

@Thickness 0.118 in
Oxygen Index 22 %
22 %
ISO 4589-2
Glow Wire Test 750 °C
1380 °F
IEC 60695-2-12
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+15 ohm-cm
1.00e+15 ohm-cm
IEC 60093
Surface Resistance 1.00e+12 ohm
1.00e+12 ohm
IEC 60093
Dielectric Constant 4.0
4.0
IEC 60250
Dielectric Strength 24.0 kV/mm
610 kV/in
IEC 60243-1
Dissipation Factor 0.010
0.010
IEC 60250
Comparative Tracking Index 600 V
600 V
IEC 60112
Processing Properties Metric English Comments
Processing Temperature 135 - 160 °C
275 - 320 °F
Compression moulding, matched metal die
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved