- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- HDPE
- High Density Polyethylene (HDPE), Extruded
- LyondellBasell Petrothene® LR734045 High Density Polyethylene (Sheet & Profile Extrusion)
LyondellBasell Petrothene® LR734045 High Density Polyethylene (Sheet & Profile Extrusion)
| Category | Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Extruded |
| Manufacturer | LyondellBasell (former Equistar) |
| Trade Name | Petrothene® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | LyondellBasell Petrothene® LR734045 High Density Polyethylene (Sheet & Profile Extrusion).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
ApplicationsThe PETROTHENE LR 7340 series of polyethylene resins exhibits good stiffness and ESCR. Typical applications include bottles for household chemicals.Regulatory StatusThe base resin LR 7340 meets the requirements of Food and Drug Administration regulation, 21 CFR 177.1520. This regulation allows the use of this olefin polymer in "…articles or components of articles intended for use in contact with food." Specific limitations or conditions of use may apply. Contact your Equistar sales representative for more information. Processing TechniquesSpecific recommendations for processing LR 7320 can only be made when the processing conditions, equipment and end use are known. For further suggestions, please contact your Equistar sales representative.This product is from the former Equistar product line.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.953 g/cc | 0.0344 lb/in³ | ASTM D1505 |
| Environmental Stress Crack Resistance | 25 hour | 25 hour | F<sub>50</sub>; ASTM D1693 |
| ESCR Blow Molding | 25 hour | 25 hour | ASTM D1693 |
| ESCR, Bottle | >= 500 hour | >= 500 hour | F<sub>50</sub>; ASTM D2561 |
| Melt Flow | 0.38 g/10 min | 0.38 g/10 min | ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 67 | 67 | ASTM D2240 |
| Tensile Strength, Yield | 27.6 MPa | 4000 psi | ASTM D638 |
| Elongation at Break | >= 500 % | >= 500 % | ASTM D638 |
| Flexural Modulus | 1.21 GPa | 176 ksi | ASTM D790 |
| Tensile Impact | 69.9 J/cm | 131 ft-lb/in | ASTM D1822 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 75.0 °C | 167 °F | ASTM D648 |
| Vicat Softening Point | 127 °C | 261 °F | ASTM D1525 |
| Brittleness Temperature | <= -76.0 °C | <= -105 °F | F<sub>50</sub>; ASTM D746 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Antistat | None | |
| Stearate | High |
Users viewing this material also viewed the following:
- Polymax® Maxelast® P3780 TPE, PP Overmold or Standalone use
- Pinnacle Polymers 1112 Polypropylene Homopolymer, Injection Molding Grade
- Kazanorgsintez 153-15 Composition of Low Density Polyethylene, Crack-Proof
- Silberline SilBerCote® 5852-20Z
- Sharadaa Ceramics REFCAST HA PLUS High Alumina Castables
- Trelleborg AEM Eccofloat® EL-30/2000 Syntactic Foam
- Borealis BorSafe™ HE3490-IM HDPE Compound for Injection Molded Pressure Fittings
- 3M PS192 White Yupo™ TIS Label Products
- 3M 7237 HP Indigo Optimized Polyester Label Product
Copyright © lookpolymers.com All Rights Reserved