- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- HDPE
- High Density Polyethylene (HDPE), Sheet/Thermoforming Grade
- LyondellBasell Petrothene® LP500200 High Density Polyethylene (Sheet & Profile Grade)
LyondellBasell Petrothene® LP500200 High Density Polyethylene (Sheet & Profile Grade)
| Category | Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Sheet/Thermoforming Grade |
| Manufacturer | LyondellBasell (former Equistar) |
| Trade Name | Petrothene® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | LyondellBasell Petrothene® LP500200 High Density Polyethylene (Sheet & Profile Grade).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
ApplicationsThe PETROTHENE LP 5002 series of polyethylene resins exhibits excellent environmental stress crack resistance.Regulatory StatusThe LP 5002 base resin meets the requirements of Food and Drug Administration regulation, 21 CFR 177.1520. This regulation allows the use of this olefin polymer in "articles or components of articles intended for use in contact with food." Specific limitations or conditions of use may apply. Contact your Equistar sales representative for more information. Processing TechniquesSpecific recommendations for processing LP 5002 can only be made when the processing conditions, equipment and end use are known. For further suggestions, please contact your Equistar sales representative.This product is from the former Equistar product line.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.946 g/cc | 0.0342 lb/in³ | ASTM D1505 |
| Environmental Stress Crack Resistance | >= 1000 hour | >= 1000 hour | F<sub>50</sub>; ASTM D1693 |
| ESCR, Bottle | >= 1000 hour | >= 1000 hour | F<sub>50</sub>; ASTM D2561 |
| Melt Flow | 0.20 g/10 min | 0.20 g/10 min | ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 65 | 65 | ASTM D2240 |
| Tensile Strength, Yield | 23.4 MPa | 3400 psi | ASTM D638 |
| Elongation at Break | >= 800 % | >= 800 % | ASTM D638 |
| Flexural Modulus | 0.965 GPa | 140 ksi | ASTM D790 |
| Tensile Impact | 131 J/cm | 245 ft-lb/in | ASTM D1822 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 66.0 °C | 151 °F | ASTM D648 |
| Vicat Softening Point | 122 °C | 252 °F | ASTM D1525 |
| Brittleness Temperature | <= -76.0 °C | <= -105 °F | F<sub>50</sub>; ASTM D746 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Antistat | None |
Users viewing this material also viewed the following:
- PolyOne Bergamid™ B70 G30 BK Polyamide 6 (Nylon 6)
- PolyOne Geon™ FIT E 50 Polyvinyl Chloride Homopolymer (PVC Homopolymer)
- Gouda Vuurvast VIBRON 170 M GS (R) Dense Vibrating Refractory Castable
- SABIC Innovative Plastics LNP THERMOCOMP AW00A ABS (Europe-Africa-Middle East)
- Master Bond EP37-3FLFAN Electrically Isolating, Flexible Epoxy
- A. Schulman POLYBATCH™ Yellow 2450E Concentrate Based In Polyethylene
- Ensinger Tecamid® 6/6 Nylon (PA66)
- ATG s.r.l. ACM Polyacrylic Rubber
- 3M Scotch® 353 High Performance Box Sealing Tape
- 3M Scotchcal™ 1000-197 Graphic Film
Copyright © lookpolymers.com All Rights Reserved