- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- LLDPE
- Linear Low Density Polyethylene (LLDPE), Injection Molded
- LyondellBasell Petrothene® GA594189 Linear Low Density Polyethylene, Injection Molding Grade
LyondellBasell Petrothene® GA594189 Linear Low Density Polyethylene, Injection Molding Grade
| Category | Polymer , Thermoplastic , Polyethylene (PE) , LLDPE , Linear Low Density Polyethylene (LLDPE), Injection Molded |
| Manufacturer | LyondellBasell (former Equistar) |
| Trade Name | Petrothene® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | LyondellBasell Petrothene® GA594189 Linear Low Density Polyethylene, Injection Molding Grade.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
PETROTHENE GA594189 is a pelletized LLDPE copolymer resin for injection molding thin-walled items requiring high flow and short cycle times. GA594189 exhibits excellent flow, warp resistance and surface appearance.Specific recommendations for processing GA594189 can only be made when the processing conditions, equipment and end use are known. For further suggestions, please contact your Equistar sales representative.This product is from the former Equistar product line.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.933 g/cc | 0.0337 lb/in³ | ASTM D1505 |
| Melt Flow | 140 g/10 min | 140 g/10 min | ASTM D1238 |
| Spiral Flow | 67.8 cm | 26.7 in | Equistar test |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 61 | 61 | ASTM D2240 |
| Tensile Strength at Break | 17.3 MPa | 2510 psi | ASTM D638 |
| Tensile Strength, Yield | 17.3 MPa | 2510 psi | 2"/min; ASTM D638 |
| Elongation at Yield | 9.8 % | 9.8 % | 2"/min; ASTM D638 |
| 1% Secant Modulus | 669 MPa | 97000 psi | 0.5"/min; ASTM D790 |
| 2% Secant Modulus | 0.572 GPa | 83.0 ksi | 0.5"/min; ASTM D790 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 52.0 °C | 126 °F | ASTM D648 |
| Vicat Softening Point | 91.0 °C | 196 °F | ASTM D1525 |
| Brittleness Temperature | <= -27.0 °C | <= -16.6 °F | F<SUB>50</SUB>; ASTM D746 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Rear Barrel Temperature | 177 °C | 350 °F | |
| Middle Barrel Temperature | 191 °C | 375 °F | |
| Front Barrel Temperature | 204 °C | 400 °F | |
| Nozzle Temperature | 204 °C | 400 °F |
Users viewing this material also viewed the following:
- SABIC PP 5701P Polypropylene Homopolymer for Injection Molding
- Kennametal Stellite Stoody® 1 Cobalt-Base Cast Alloy
- Hannam Chemical Hanalac HFA-700 ABS
- SGL Carbon Group SIGRAFIL C® C25 P350 GLY Pelletized Carbon Fiber, Glycerine Sizing
- UBE 5034T Nylon 6/66 Monofilament (Drawing Ratio=5)
- Arkema Group Orgalloy® R 60 ES Polyamide Alloy
- BASF Pluracol® 1365 Graft Slabstock Foam Polyol
- Alliance BCN-15 Bonded (Composite) Magnetic Material
Copyright © lookpolymers.com All Rights Reserved