Lubrizol Estane® 58123 Thermoplastic Polyurethane

Category	Polymer , Thermoplastic , Polyurethane, TP , Thermoplastic Polyurethane (TPUR), Polyether Grade
Manufacturer	Lubrizol (former Noveon)
Trade Name	ESTANE®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Lubrizol Estane® 58123 Thermoplastic Polyurethane.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Features: High moisture vapor transmission with low water swell and excellent low temperature and elasticity properties.Uses: Blown and flat die/cast film extrusion, injection molding and cable jacketing.Available in Americas, Europe, Middle East, Africa, India and AsiaInformation Provided by The Lubrizol Corporation

Physical Properties	Metric	English	Comments
Specific Gravity	1.06 g/cc	1.06 g/cc	ASTM D792
Water Vapor Transmission	420 g/m²/day	27.0 g/100 in²/day	50% RH; ASTM E96B
	3200 g/m²/day	206 g/100 in²/day	90% RH; ASTM D6701
Maximum Moisture Content	0.020	0.020

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	70 @Time 5.00 sec	70 @Time 0.00139 hour	ASTM D2240
Tensile Strength	36.5 MPa	5290 psi	ASTM D412
Elongation at Break	730 %	730 %	ASTM D412
100% Modulus	0.00340 GPa	0.493 ksi	ASTM D412
300% Modulus	0.00550 GPa	0.798 ksi	ASTM D412
Tear Strength	19.3 kN/m	110 pli	Trouser; ASTM D470
Graves Tear Strength	66.6 kN/m	380 pli	Die C; ASTM D624
Taber Abrasion, mg/1000 Cycles	17	17	H18, 1000g; ASTM D3389
Tensile Set	6.0 %	6.0 %	200% elongation; ASTM D412

Thermal Properties	Metric	English	Comments
Melting Point	135 °C	275 °F	DSC
Glass Transition Temp, Tg	-70.0 °C	-94.0 °F	DSC

Processing Properties	Metric	English	Comments
Rear Barrel Temperature	190 °C	374 °F	Injection
Middle Barrel Temperature	199 °C	390 °F	Injection
Front Barrel Temperature	215 °C	419 °F	Injection
Nozzle Temperature	215 °C	419 °F	Injection
Zone 1	171 °C	340 °F	Extrusion
Zone 2	177 °C	351 °F	Extrusion
Zone 3	182 °C	360 °F	Extrusion
Zone 4	188 °C	370 °F	Extrusion
Adapter Temperature	193 °C	379 °F	5, Extrusion
Die Temperature	193 °C	379 °F	Zone 1, 6, Extrusion
	193 °C	379 °F	Zone 2, Extrusion
Melt Temperature	150 °C	302 °F	Kofler
	218 °C	424 °F	Injection
Mold Temperature	15.0 - 32.0 °C	59.0 - 89.6 °F	Injection
Drying Temperature	82.0 °C	180 °F
Dry Time	2.00 - 4.00 hour	2.00 - 4.00 hour
Dew Point	-40.0 °C	-40.0 °F

Descriptive Properties	Value	Comments
Volume Swell in Water	1.5%	24hrs, ASTM D471

Users viewing this material also viewed the following: