POLYMER SEARCH

Constellium Fibral® Cast Aluminum Sliced Plate

Category	Metal , Nonferrous Metal , Aluminum Alloy , 5000 Series Aluminum Alloy , Aluminum Casting Alloy
Manufacturer	Constellium
Trade Name	Fibral®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Constellium Fibral® Cast Aluminum Sliced Plate.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Fibral® has been specifically developed for low–pressure processing (thermoforming, RTM) of plastics and their composites. The material can also be used for prototype injection moulds. The material properties are enhanced by its stringent casting process which considerably reduces porosity throughout the thickness of the plate.Information provided by manufacturer

Physical Properties	Metric	English	Comments
Density	2.66 g/cc	0.0961 lb/in³

Mechanical Properties	Metric	English	Comments
Hardness, Brinell	70 @Thickness 150 - 500 mm	70 @Thickness 5.91 - 19.7 in
	70 @Thickness 500 - 600 mm	70 @Thickness 19.7 - 23.6 in
Tensile Strength	>= 210 MPa @Thickness 150 - 500 mm	>= 30500 psi @Thickness 5.91 - 19.7 in	Temper O3
	>= 210 MPa @Thickness 500 - 600 mm	>= 30500 psi @Thickness 19.7 - 23.6 in	Temper O3
	235 MPa @Thickness 150 - 500 mm	34100 psi @Thickness 5.91 - 19.7 in	Typical Strength
	235 MPa @Thickness 500 - 600 mm	34100 psi @Thickness 19.7 - 23.6 in	Typical Strength
Tensile Strength, Yield	>= 110 MPa @Strain 0.200 %, Thickness 150 - 500 mm	>= 16000 psi @Strain 0.200 %, Thickness 5.91 - 19.7 in	Temper O3
	>= 110 MPa @Strain 0.200 %, Thickness 500 - 600 mm	>= 16000 psi @Strain 0.200 %, Thickness 19.7 - 23.6 in	Temper O3
	115 MPa @Strain 0.200 %, Thickness 150 - 500 mm	16700 psi @Strain 0.200 %, Thickness 5.91 - 19.7 in	Typical Strength
	115 MPa @Strain 0.200 %, Thickness 500 - 600 mm	16700 psi @Strain 0.200 %, Thickness 19.7 - 23.6 in	Typical Strength
Elongation at Break	>= 5.0 % @Thickness 150 - 500 mm	>= 5.0 % @Thickness 5.91 - 19.7 in	Temper O3
	>= 5.0 % @Thickness 500 - 600 mm	>= 5.0 % @Thickness 19.7 - 23.6 in	Temper O3
	9.5 % @Thickness 150 - 500 mm	9.5 % @Thickness 5.91 - 19.7 in	Typical Elongation
	9.5 % @Thickness 500 - 600 mm	9.5 % @Thickness 19.7 - 23.6 in	Typical Elongation
Modulus of Elasticity	71.0 GPa	10300 ksi

Thermal Properties	Metric	English	Comments
CTE, linear	23.8 µm/m-°C @Temperature 20.0 - 100 °C	13.2 µin/in-°F @Temperature 68.0 - 212 °F
Thermal Conductivity	105 - 120 W/m-K	729 - 833 BTU-in/hr-ft²-°F

Component Elements Properties	Metric	English	Comments
Aluminum, Al	92.55 - 95.55 %	92.55 - 95.55 %	as balance
Chromium, Cr	0.050 - 0.25 %	0.050 - 0.25 %
Copper, Cu	<= 0.10 %	<= 0.10 %
Iron, Fe	<= 0.40 %	<= 0.40 %
Magnesium, Mg	4.0 - 4.9 %	4.0 - 4.9 %
Manganese, Mn	0.40 - 1.0 %	0.40 - 1.0 %
Silicon, Si	<= 0.40 %	<= 0.40 %
Zinc, Zn	<= 0.25 %	<= 0.25 %
Zr+Ti	<= 0.15 %	<= 0.15 %

Electrical Properties	Metric	English	Comments
Electrical Resistivity	0.00000590 - 0.00000660 ohm-cm	0.00000590 - 0.00000660 ohm-cm

Users viewing this material also viewed the following: