- HOME
- POLYMER SEARCH
- Thermoset
- Silicone
- Silicone, RTV, Encapsulation Grade
- Lord Adhesives Circalokâ„¢ 6715 Silicone Encapsulant
Lord Adhesives Circalokâ„¢ 6715 Silicone Encapsulant
| Category | Polymer , Thermoset , Silicone , Silicone, RTV, Encapsulation Grade |
| Manufacturer | Lord Adhesives |
| Trade Name | Circalok™ |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Lord Adhesives Circalokâ„¢ 6715 Silicone Encapsulant.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Circalokâ„¢ 6715 is a two component, medium viscosity, solvent-free silicone which cures at room temperature to an elastomeric, stress-free rubber of outstanding electrical and high temperature properties. It is the ideal product for potting and encapsulating densely packed components and for making flexible molds.All information provided by Lord.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.25 g/cc @Temperature 25.0 °C |
1.25 g/cc @Temperature 77.0 °F |
|
| Viscosity | 14000 cP @Temperature 25.0 °C |
14000 cP @Temperature 77.0 °F |
|
| Linear Mold Shrinkage | 0.0020 cm/cm | 0.0020 in/in |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 35 | 35 | |
| Tensile Strength, Yield | 1.72 MPa @Temperature 25.0 °C |
250 psi @Temperature 77.0 °F |
|
| Elongation at Yield | 160 % | 160 % | |
| Tear Strength | 4.38 kN/m | 25.0 pli | Die B |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 1.40 µm/m-°C | 0.778 µin/in-°F | |
| Thermal Conductivity | 0.346 W/m-K | 2.40 BTU-in/hr-ft²-°F | |
| Maximum Service Temperature, Air | 200 °C | 392 °F | Continuous |
| 300 °C | 572 °F | Intermittent | |
| Minimum Service Temperature, Air | -100 °C | -148 °F | Intermittent |
| -80.0 °C | -112 °F | Continuous |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+14 ohm-cm @Temperature 25.0 °C |
1.00e+14 ohm-cm @Temperature 77.0 °F |
|
| Dielectric Constant | 3.5 @Temperature 25.0 °C |
3.5 @Temperature 77.0 °F |
|
| Dielectric Strength | 19.7 kV/mm | 500 kV/in | |
| Dissipation Factor | 0.020 @Frequency 100000 Hz, Temperature 25.0 °C |
0.020 @Frequency 100000 Hz, Temperature 77.0 °F |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Shelf Life | 6.00 Month | 6.00 Month |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Appearance | White |
Users viewing this material also viewed the following:
- H.C. Starck Ampersint® MAP FeNi 50/50 For Soft Magnets
- Lehmann & Voss LUVOCOM® 1-7139-1 Polyamide 66, with aramid reinforcement and PTFE, heat stabilized
- Styron XZ 94463.01 Functionalized SB
- Eastman Tritan MX730 Copolyester
- CRP Technology Windform® GT Polyamide Glass Composite
- Denka REOMER G G8070 Thermoplastic Elastomer, For Injection Molding
- Diamond Polymers Softflex® SF 5560 Overmold for Nylon
- Fainplast Compounds GS 30 Flexible PVC, Injection Molding, Lead Free
- Ineos H13Z-00 Polypropylene Homopolymer (discontinued **)
- Lehmann & Voss LUVOCOM® 1105-7173/BL PEEK, with glass fiber
Copyright © lookpolymers.com All Rights Reserved