- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyketone
- Polyetheretherketone (PEEK)
- Lehmann & Voss LUVOCOM® 1105-0831 PEEK, unreinforced, easy flowing
Lehmann & Voss LUVOCOM® 1105-0831 PEEK, unreinforced, easy flowing
| Category | Polymer , Thermoplastic , Polyketone , Polyetheretherketone (PEEK) |
| Manufacturer | Lehmann & Voss & Co. |
| Trade Name | LUVOCOM® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Lehmann & Voss LUVOCOM® 1105-0831 PEEK, unreinforced, easy flowing.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Applications: Automotive industry, textile machinery, medical- and precision engineering, aircraft industry.High chemical resistance parts, non flammable.Suitable for biocompatible application.Not flammable.Information provided by Lehmann & Voss & Co.KG
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.29 g/cc | 1.29 g/cc | ISO 1183 |
| Water Absorption | 0.50 % | 0.50 % | 23°C/24h |
| Linear Mold Shrinkage | 0.010 - 0.016 cm/cm | 0.010 - 0.016 in/in | |
| Melt Flow | 19.35 g/10 min @Load 1.20 kg, Temperature 380 °C |
19.35 g/10 min @Load 2.65 lb, Temperature 716 °F |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Stress | 100 MPa | 14500 psi | |
| Elongation at Yield | 4.7 % | 4.7 % | |
| 6.0 % | 6.0 % | flexural | |
| Modulus of Elasticity | 4.00 GPa | 580 ksi | |
| Flexural Strength | 145 MPa | 21000 psi | |
| Flexural Modulus | 3.50 GPa | 508 ksi | |
| Coefficient of Friction, Dynamic | 0.26 | 0.26 | |
| Coefficient of Friction, Static | 0.21 | 0.21 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 50.0 µm/m-°C | 27.8 µin/in-°F | DIN 53752 |
| Thermal Conductivity | 0.250 W/m-K | 1.74 BTU-in/hr-ft²-°F | DIN 52612 |
| Maximum Service Temperature, Air | 250 °C | 482 °F | |
| 260 °C | 500 °F | short term | |
| Deflection Temperature at 1.8 MPa (264 psi) | 156 °C | 313 °F | |
| Vicat Softening Point | 300 °C | 572 °F | DIN ISO 306 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Insulation Resistance | >= 1.00e+12 ohm | >= 1.00e+12 ohm |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 390 °C | 734 °F | mass temp |
| Nozzle Temperature | 360 - 380 °C | 680 - 716 °F | |
| Zone 1 | 360 - 370 °C | 680 - 698 °F | |
| Zone 2 | 380 - 390 °C | 716 - 734 °F | |
| Zone 3 | 390 - 400 °C | 734 - 752 °F | |
| Mold Temperature | 170 - 200 °C | 338 - 392 °F | |
| Drying Temperature | 120 °C @Time 21600 - 28800 sec |
248 °F @Time 6.00 - 8.00 hour |
or |
| 150 °C @Time 10800 - 21600 sec |
302 °F @Time 3.00 - 6.00 hour |
Dehumidifying dryer |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | black |
Users viewing this material also viewed the following:
- Formosa Plastics Formolene® DB5305A Blow Molding HDPE (discontinued **)
- Hong Kun Group 3-Boc-3,7-Diazabicyclo [3.3.0]Octane Pharmaceutical Intermediate
- Momentive Performance Materials AC6043 Titanium Diboride/Boron Nitride Composite
- Lucent Polymers PPC-210 Polypropylene, Impact Modified
- Saint-Gobain Norton® T-200 Mechanical Grade PTFE Sheet (0.125" thick)
- DSM Akulon® F223-D Nylon 6 (European and Asian Grade) (Dry)
- Dow DMDB-7950 NT 7 High Density Polyethylene Resin
- Arkema Group Pebax® 5533 SN 70 NOIR Polyether Block Amide (PEBA) (Conditioned)
- Unipetrol PND 33-352-94 Extra Light Fuel Oil
Copyright © lookpolymers.com All Rights Reserved