LNP Lubricomp® PDX-E-00548 CCS Polyetherimide, Aramid Fiber Reinforced, PTFE Lubricant (discontinued **)

Category	Polymer , Thermoplastic , Polyetherimide (PEI) , Polyetherimide (PEI), Aramid Fiber Filled
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	LNP Lubricomp® PDX-E-00548 CCS Polyetherimide, Aramid Fiber Reinforced, PTFE Lubricant (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Features: Lubricated, Low to None Ion ContentForms: PelletsProcessing Method: Injection MoldingInformation provided by LNP, a GE Plastics Company.This data sheet is labeled Discontinued; however many LNP grades are still active under new names instituted after the SABIC purchase.

Physical Properties	Metric	English	Comments
Specific Gravity	1.31 g/cc	1.31 g/cc	Method A; ASTM D792
Density	1.31 g/cc	0.0473 lb/in³	ISO 1183
Water Absorption	0.20 %	0.20 %	at 24 hrs; ASTM D570
Linear Mold Shrinkage	0.0070 cm/cm	0.0070 in/in	ASTM D955
Linear Mold Shrinkage, Transverse	0.0070 cm/cm	0.0070 in/in	ASTM D955

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	83.4 MPa	12100 psi	ASTM D638
Tensile Strength, Yield	84.8 MPa	12300 psi	ASTM D638
Elongation at Break	8.1 %	8.1 %	ASTM D638
Elongation at Yield	6.1 %	6.1 %	ASTM D638
Tensile Modulus	3.03 GPa	439 ksi	ASTM D638
Flexural Strength	145 MPa	21000 psi	ASTM D790
Flexural Modulus	3.45 GPa	500 ksi	ASTM D790
Izod Impact, Notched	0.267 J/cm @Thickness 3.18 mm	0.500 ft-lb/in @Thickness 0.125 in	ASTM D256
Izod Impact, Unnotched	4.70 J/cm @Thickness 3.18 mm	8.81 ft-lb/in @Thickness 0.125 in	ASTM D256
Izod Impact, Notched (ISO)	4.70 kJ/m²	2.24 ft-lb/in²	ISO 180
Izod Impact, Unnotched (ISO)	32.6 kJ/m²	15.5 ft-lb/in²	ISO 180
Falling Dart Impact	4.90 J	3.61 ft-lb	ASTM D3763

Thermal Properties	Metric	English	Comments
Deflection Temperature at 1.8 MPa (264 psi)	185 °C	365 °F	Unannealed; ASTM D648

Processing Properties	Metric	English	Comments
Melt Temperature	360 - 366 °C	680 - 691 °F
Mold Temperature	121 - 149 °C	250 - 300 °F
Drying Temperature	121 - 149 °C	250 - 300 °F
Dry Time	4 hour	4 hour
Moisture Content	0.020 %	0.020 %	Suggested
Back Pressure	0.345 - 0.689 MPa	50.0 - 99.9 psi

Users viewing this material also viewed the following: