- HOME
- POLYMER SEARCH
- Thermoplastic
- Styrene-Butadiene
- Styrene/Butadiene/Styrene (SBS)
- Kraton® D2104 DI-N (SBS) Compound
Kraton® D2104 DI-N (SBS) Compound
| Category | Polymer , Thermoplastic , Styrene-Butadiene , Styrene/Butadiene/Styrene (SBS) |
| Manufacturer | Kraton |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Kraton® D2104 DI-N (SBS) Compound.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: Kraton D2104 DI-N is an easy processing, general purpose material designed for a wide variety of applications. It is supplied from North America in the physical form identified: D2104 DI-N - supplied as a translucent dense pelletRegion: North America, Europe, Asia Pacific, Japan, and South AmericaApplications: Adhesives, Sealant and Coatings; Bitumen Modification; Compounding and Personal Hygiene; Footwear; and Impact ModificationInformation provided by Kraton®
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.900 - 0.940 g/cc | 0.900 - 0.940 g/cc | BAM 1014 |
| Linear Mold Shrinkage, Flow | 0.025 - 0.027 cm/cm | 0.025 - 0.027 in/in | |
| Melt Flow | 14 - 24 g/10 min @Load 5.00 kg, Temperature 200 °C |
14 - 24 g/10 min @Load 11.0 lb, Temperature 392 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 30 - 40 | 30 - 40 | Value of product extruded at 175°C; BAM 1003 |
| Tensile Strength | 7.93 MPa | 1150 psi | Transverse Direction; Injection molded sample tested at 10 in/min with Die D; ASTM D412 |
| 9.65 MPa | 1400 psi | Machine Direction; Injection molded sample tested at 10 in/min with Die D; ASTM D412 | |
| Elongation at Break | 1200 % | 1200 % | Machine Direction; Injection molded sample tested at 10 in/min with Die D; ASTM D412 |
| 1300 % | 1300 % | Transverse Direction; Injection molded sample tested at 10 in/min with Die D; ASTM D412 | |
| 100% Modulus | 0.000517 GPa | 0.0750 ksi | Transverse Direction; Injection molded sample tested at 10 in/min with Die D; ASTM D412 |
| 0.00151 GPa | 0.219 ksi | Machine Direction; Injection molded sample tested at 10 in/min with Die D; ASTM D412 | |
| 300% Modulus | 0.00103 GPa | 0.149 ksi | Transverse Direction; Injection molded sample tested at 10 in/min with Die D; ASTM D412 |
| 0.00241 GPa | 0.350 ksi | Machine Direction; Injection molded sample tested at 10 in/min with Die D; ASTM D412 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Rear Barrel Temperature | 171 - 182 °C | 340 - 360 °F | |
| Middle Barrel Temperature | 177 - 193 °C | 350 - 380 °F | |
| Front Barrel Temperature | 188 - 199 °C | 370 - 390 °F | |
| Mold Temperature | 10.0 - 37.8 °C | 50.0 - 100 °F | |
| Injection Pressure | 3.549 - 4.928 MPa | 514.7 - 714.7 psi | |
| Back Pressure | 0.276 - 0.414 MPa | 40.0 - 60.0 psi |
Users viewing this material also viewed the following:
- Outokumpu 4310 Cr-Ni Austenitic Stainless Steel
- SABIC Innovative Plastics LNP LUBRICOMP AL003 ABS
- Borealis HB306MO Polypropylene
- A. Schulman POLYBATCH™ ASC-331 Inorganic Antislip Masterbatch Based in Polyethylene
- A. Schulman PP 1621 Polypropylene Low Flow Homopolymer Polypropylene
- Wellman Wellamid® GF33-66 XE-NBK1 33% Glass Fiber Reinforced, Engineering Grade Nylon 66
- ExxonMobil Escorene™ FL 02020 Ethylene Vinyl Acetate Copolymer (European Grade)
- Dow Corning 5580 Performance Modifier
- Dymax 910 Strain Relief, Wire and Parts Tacking Adhesive
- Alliance Polymers Viprene™ P70A-22U-BLK Thermoplastic Vulcanizate Elastomer
Copyright © lookpolymers.com All Rights Reserved