- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Kraton® D1117 P (SIS) Linear Triblock Copolymer
Kraton® D1117 P (SIS) Linear Triblock Copolymer
| Category | Polymer , Thermoplastic , Elastomer, TPE |
| Manufacturer | Kraton |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Kraton® D1117 P (SIS) Linear Triblock Copolymer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: Kraton D1117 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied from North America in the physical form identified: Kraton D1117 PT - supplied as a dusted dense pelletRegion: South America, Europe, Asia Pacific, North America, and Japan Uses: Kraton D1117 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.Applications: Adhesives, Sealant and Coatings; Compounding and Personal Hygiene; Impact Modification; Footwear; and Bitumen ModificationInformation provided by Kraton®
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.920 g/cc | 0.920 g/cc | ASTM D4025 |
| Volatiles | <= 0.50 % | <= 0.50 % | KM 04 |
| Viscosity | 350 - 590 cP | 350 - 590 cP | 25% Toluene Solution at 25°C; BAM 922 |
| Melt Flow | 29 g/10 min @Load 5.00 kg, Temperature 200 °C |
29 g/10 min @Load 11.0 lb, Temperature 392 °F |
|
| Ash | 0.30 - 0.40 % | 0.30 - 0.40 % | Talc; BAM 908 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 33 @Time 10.0 sec |
33 @Time 0.00278 hour |
Typical values on polymer compression molded at 300°F; ASTM D2240 |
| Tensile Strength | 8.27 MPa | 1200 psi | Typical properties on film cast from toluene solution; ASTM D412 |
| Elongation at Break | 1300 % | 1300 % | Typical properties of film cast from toluene solution; ASTM D412 |
| 300% Modulus | 0.000414 GPa | 0.0600 ksi | Typical properties of film cast form toluene solution; ASTM D412 |
| Chemical Properties | Metric | English | Comments |
|---|---|---|---|
| Diblock Content | 33 % | 33 % |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Content | Antioxidant | 0.08-0.3%, KM 08 |
| Polystyrene | 15.6-19.2%, KM 03 | |
| Total Extractables | <1.0%, KM 05 | |
| Styrene/Rubber Ratio | 17/83 |
Users viewing this material also viewed the following:
- Polimeri Europa Europrene® SOL T 9113 Styrene - Isoprene Block Copolymer
- Pyrotek F-51 Dense Machinable Board
- Northstar Polymers MAP-R06C Semi Rigid Structural Foam Formulation
- KKPC KOSYN 1712G Styrene Butadiene Rubber
- MetalTek MTEK 309 Cast UNS J93400 Austenitic Stainless Steel
- Lucite International Diakon® CMH454L Acrylic Polymer
- A. Schulman POLYBATCH™ Norwegian Wood 60242U/3 Concentrate Based In LLDPE
- Eurostar Starflam RX06082 PA66/6, Glass Fiber Filled, Flame Retardant, Injection Molded
Copyright © lookpolymers.com All Rights Reserved