- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Kraton® D1113 P (SIS) Linear Block Copolymer
Kraton® D1113 P (SIS) Linear Block Copolymer
| Category | Polymer , Thermoplastic , Elastomer, TPE |
| Manufacturer | Kraton |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Kraton® D1113 P (SIS) Linear Block Copolymer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: Kraton D1113 P is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied from North America in the physical form identified: Kraton D1113 PT - supplied as a dusted dense pelletRegion: South America, Europe, Asia Pacific, North America, and Japan Uses: Kraton D1113 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.Applications: Adhesives, Sealant and Coatings; Compounding and Personal Hygiene; Impact Modification; Footwear; and Bitumen ModificationInformation provided by Kraton®
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.920 g/cc | 0.920 g/cc | ASTM D4025 |
| Volatiles | <= 0.50 % | <= 0.50 % | KM 04 |
| Viscosity | 470 - 890 cP | 470 - 890 cP | 25% Toluene Solution at 25°C; BAM 922 |
| Melt Flow | 24 g/10 min @Load 5.00 kg, Temperature 200 °C |
24 g/10 min @Load 11.0 lb, Temperature 392 °F |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 23 @Time 10.0 sec |
23 @Time 0.00278 hour |
Typical values on polymer compression molded at 300°F; ASTM D2240 |
| Tensile Strength | 4.14 MPa | 600 psi | Typical properties on film cast from toluene solution; ASTM D412 |
| Elongation at Break | 1500 % | 1500 % | Typical properties of film cast from toluene solution; ASTM D412 |
| 300% Modulus | 0.000345 GPa | 0.0500 ksi | Typical properties of film cast form toluene solution; ASTM D412 |
| Chemical Properties | Metric | English | Comments |
|---|---|---|---|
| Diblock Content | 56 % | 56 % |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Content | Antioxidant | 0.08-0.3%, KM 08 |
| Dust, Talc | 0.3-0.4%, BAM 908 | |
| Polystyrene | 15.1-17.3%, KM 03 | |
| Styrene/Rubber Ratio | 16/84 |
Users viewing this material also viewed the following:
- Osprey Metals Co552 Cobalt Alloy Powder (Grade 80% - 22)
- Polymer Resources PC-UV4 Polycarbonate, UV-stabilized, Easy Flow
- Silberline EternaBrite® 651-7
- Toyobo TS401 HS PPS, 40% Glass Fiber Reinforced
- Ensinger TECASINT 3012 Polyimide, Ochre Brown (PI)
- Dow DOWLEX™ 2049 Linear Low Density Polyethylene, Food Grade
- 3A Composites Core Materials AIREX® T90.150 Easy Processing Structural FST Foam
- Bulk Molding Compounds BMC 900 Thermoset Polyester, Soft Flow Encapsulation Grade
- Lucite International SW Sanitary Ware Acrylic Sheet
- Multibase Multi-Flex® TPE A 5703 BLK Low AO
Copyright © lookpolymers.com All Rights Reserved