Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Kingfa PET-G30 30% Glass Fiber Reinforced PET

Category Polymer , Thermoplastic , Polyester, TP , Polyethylene Terephthalate (PET) , Polyethylene Terephthalate (PET), 30% Glass Reinforced
Manufacturer Kingfa Sci. & Tech. Co.
Trade Name
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Kingfa PET-G30 30% Glass Fiber Reinforced PET.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Features:High strengthGood heat resistanceApplications:Injection moldingApplication partsAuto partsInformation Provided by Kingfa Sci. & Tech. Co., Ltd.
Physical Properties Metric English Comments
Specific Gravity 1.54 g/cc

@Temperature 23.0 °C
1.54 g/cc

@Temperature 73.4 °F
ASTM D792
Water Absorption 0.070 %

@Temperature 23.0 °C,
Time 86400 sec
0.070 %

@Temperature 73.4 °F,
Time 24.0 hour
ASTM D570
Linear Mold Shrinkage 0.0030 - 0.0090 cm/cm

@Temperature 23.0 °C
0.0030 - 0.0090 in/in

@Temperature 73.4 °F
ASTM D955
Mechanical Properties Metric English Comments
Hardness, Rockwell R 120
120
ASTM D785
Tensile Strength at Break 145 MPa
21000 psi
10mm/min; ASTM D638
Elongation at Break 2.5 %
2.5 %
50mm/min; ASTM D638
Flexural Strength 205 MPa
29700 psi
2mm/min; ASTM D790
Flexural Modulus 9.50 GPa
1380 ksi
2mm/min; ASTM D790
Izod Impact, Notched 0.850 J/cm

@Thickness 3.20 mm,
Temperature 23.0 °C
1.59 ft-lb/in

@Thickness 0.126 in,
Temperature 73.4 °F
ASTM D256
Thermal Properties Metric English Comments
Deflection Temperature at 0.46 MPa (66 psi) 240 °C

@Thickness 6.40 mm
464 °F

@Thickness 0.252 in
ASTM D648
Deflection Temperature at 1.8 MPa (264 psi) 230 °C

@Thickness 6.40 mm
446 °F

@Thickness 0.252 in
ASTM D648
Flammability, UL94 HB

@Thickness 1.50 mm
HB

@Thickness 0.0591 in
HB

@Thickness 3.00 mm
HB

@Thickness 0.118 in
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+16 ohm-cm
1.00e+16 ohm-cm
ASTM D257
Processing Properties Metric English Comments
Processing Temperature <= 270 °C
<= 518 °F
Rear Barrel Temperature 235 - 255 °C
455 - 491 °F
Start Point: 245°C
Middle Barrel Temperature 245 - 265 °C
473 - 509 °F
Start Point: 250°C
Front Barrel Temperature 255 - 275 °C
491 - 527 °F
Start Point: 260°C
Melt Temperature 255 - 275 °C
491 - 527 °F
Start Point: 260°C
Mold Temperature 80.0 - 120 °C
176 - 248 °F
Start Point: 100°C
Drying Temperature 120 - 140 °C

@Time 10800 - 18000 sec
248 - 284 °F

@Time 3.00 - 5.00 hour
Pre-dry
Descriptive Properties Value Comments
Glass Fiber Content (%) 30
Injection Speed Moderate to High
Copyright © lookpolymers.com All Rights Reserved