Kingfa JH-R2G10 P60 10% Glass Fiber Reinforced PC/ABS Alloy

Category	Polymer , Thermoplastic , ABS Polymer , Polycarbonate/ABS Alloy, Glass Fiber Filled , Polycarbonate (PC)
Manufacturer	Kingfa Sci. & Tech. Co.
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Kingfa JH-R2G10 P60 10% Glass Fiber Reinforced PC/ABS Alloy.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Features:UL HB @ 1.6-3.2mmExcellent balance propertiesHigh stiffnessGood size stabilityGood surface adhesionExcellent processing properties, large partsApplications:Injection moldingAutomobile instrument panelCD-ROM base pick-upOA device and partsInformation Provided by Kingfa Sci. & Tech. Co., Ltd.

Physical Properties	Metric	English	Comments
Specific Gravity	1.22 g/cc @Temperature 23.0 Â°C	1.22 g/cc @Temperature 73.4 Â°F	ASTM D792
Water Absorption	0.12 % @Temperature 23.0 Â°C, Time 86400 sec	0.12 % @Temperature 73.4 Â°F, Time 24.0 hour	ASTM D570
Linear Mold Shrinkage	0.0030 - 0.0050 cm/cm @Temperature 23.0 Â°C	0.0030 - 0.0050 in/in @Temperature 73.4 Â°F	ASTM D955

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	82	82	ASTM D785
Tensile Strength at Break	76.0 MPa	11000 psi	10mm/min; ASTM D638
Elongation at Break	7.0 %	7.0 %	10mm/min; ASTM D638
Flexural Strength	119 MPa	17300 psi	2mm/min; ASTM D790
Flexural Modulus	4.35 GPa	631 ksi	2mm/min; ASTM D790
Izod Impact, Notched	0.750 J/cm @Thickness 3.20 mm, Temperature 23.0 Â°C	1.41 ft-lb/in @Thickness 0.126 in, Temperature 73.4 Â°F	ASTM D256
Izod Impact, Unnotched	2.80 J/cm @Thickness 3.20 mm, Temperature 23.0 Â°C	5.25 ft-lb/in @Thickness 0.126 in, Temperature 73.4 Â°F	ASTM D256

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	130 Â°C @Thickness 6.40 mm	266 Â°F @Thickness 0.252 in	ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	120 Â°C @Thickness 6.40 mm	248 Â°F @Thickness 0.252 in	ASTM D648
Flammability, UL94	HB @Thickness 3.20 mm	HB @Thickness 0.126 in

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+16 ohm-cm	1.00e+16 ohm-cm	ASTM D257
Surface Resistance	1.00e+16 ohm	1.00e+16 ohm	ASTM D257
Dielectric Strength	28.0 kV/mm	711 kV/in	1.6mm; ASTM D149

Processing Properties	Metric	English	Comments
Processing Temperature	<= 285 Â°C	<= 545 Â°F
Rear Barrel Temperature	240 - 260 Â°C	464 - 500 Â°F	Start Point: 250Â°C
Middle Barrel Temperature	245 - 270 Â°C	473 - 518 Â°F	Start Point: 255Â°C
Front Barrel Temperature	250 - 280 Â°C	482 - 536 Â°F	Start Point: 260Â°C
Melt Temperature	240 - 270 Â°C	464 - 518 Â°F	Start Point: 260Â°C
Mold Temperature	80.0 - 130 Â°C	176 - 266 Â°F	Start Point: 90Â°C
Drying Temperature	100 - 110 Â°C @Time 14400 - 21600 sec	212 - 230 Â°F @Time 4.00 - 6.00 hour	Pre-dry
Back Pressure	0.000 - 0.700 MPa	0.000 - 102 psi

Descriptive Properties	Value	Comments
Glass Fiber Content (%)	10
Injection Speed	60-90%

Users viewing this material also viewed the following: