- HOME
- POLYMER SEARCH
- Thermoplastic
- Polypropylene (PP)
- Polypropylene, Molded
- JPJ Technologies PP HC9012-M PP Homopolymer Injection Molding
JPJ Technologies PP HC9012-M PP Homopolymer Injection Molding
| Category | Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene, Molded |
| Manufacturer | JPJ Technologies |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | JPJ Technologies PP HC9012-M PP Homopolymer Injection Molding.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by JPJ Technologies
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.905 g/cc | 0.0327 lb/in³ | ASTM D792 |
| Melt Flow | 12 g/10 min @Load 2.16 kg, Temperature 230 °C |
12 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 40.0 MPa | 5800 psi | ASTM D638 |
| Elongation at Yield | 26 % | 26 % | ASTM D638 |
| 1% Secant Modulus | 2200 MPa | 319000 psi | ASTM D790A |
| Izod Impact, Notched | 0.250 J/cm | 0.468 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 130 °C | 266 °F | ASTM D648 |
Users viewing this material also viewed the following:
- Precision Polymer Engineering S50H Silicone Rubber
- Saint-Gobain CHR® 2275-2 Extruded PTFE Film Backing Silicone Adhesive Pressure Sensitive Tape
- Teknor Apex Monprene® MP-1846-L3 Thermoplastic Elastomer
- A. Schulman POLYTROPE™ TPP 1010E-01 Olefinic Elastomer For Sheet Extrusion
- Clariant Renol BR2065 Nylon 66, Mineral/Glass Reinforced
- Akzo Nobel Expancel® 551 WU 40 Wet unexpanded microspheres
- 3D Systems Accura® SI 40 Plastic for the SLA® 500 System
- Wanhua Chemical Wanthane® WHT-6232 TPU Hot-Melt Adhesive
Copyright © lookpolymers.com All Rights Reserved