- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 12
- Isoflon PA 12 Polyamide 12
Isoflon PA 12 Polyamide 12
| Category | Polymer , Thermoplastic , Nylon , Nylon 12 |
| Manufacturer | Isoflon |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Isoflon PA 12 Polyamide 12.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
General use for mechanical partsGood heat resistanceEasy to useInformation provided by Isoflon.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.04 g/cc | 1.04 g/cc | DIN 53479 |
| Water Absorption | 0.80 % | 0.80 % | ASTM D570 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 110 | 110 | ASTM D785 |
| Tensile Strength | 44.0 MPa | 6380 psi | DIN 53455 |
| Elongation at Break | 150 % | 150 % | DIN 53455 |
| Tensile Modulus | 1.55 GPa | 225 ksi | DIN 53457 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 110 µm/m-°C | 61.1 µin/in-°F | DIN 52328 |
| Thermal Conductivity | 0.300 W/m-K | 2.08 BTU-in/hr-ft²-°F | DIN 52612 |
| Melting Point | 185 °C | 365 °F | DIN 53736 |
| Maximum Service Temperature, Air | 80.0 °C | 176 °F | Continuous; DIN 52612 |
| Deflection Temperature at 1.8 MPa (264 psi) | 54.0 °C | 129 °F | |
| Minimum Service Temperature, Air | -50.0 °C | -58.0 °F | Continuous; DIN 52612 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+14 ohm-cm | 1.00e+14 ohm-cm | DIN 53482 |
| Dielectric Constant | 3.5 @Frequency 1000 Hz |
3.5 @Frequency 1000 Hz |
DIN 53483 |
| Dielectric Strength | 20.0 - 30.0 kV/mm | 508 - 762 kV/in | DIN 53481 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Nat. |
Users viewing this material also viewed the following:
- PolyOne Geon™ Vinyl Packaging UV-SORB-1 Polyvinyl Chloride, Rigid (PVC, Rigid)
- Polimeri Europa Riblene® FM 34 Low Density Polyethylene - Blown Film Extrusion
- Styron EMERGEâ„¢ 7600 Polycarbonate (PC) / Acrylonitrile Butadiene Styrene (ABS)
- Westlake EMAC® SP2205 20% Ethylene-Methyl Acrylate Copolymer
- China Tungsten Kmo47-A Molybdenum Concentrate
- Diamond Polymers NPP25-0120B GF15 Glass Filled Copolymer Polypropylene
- CMW® ELKONIUM 301 platinum based alloy
Copyright © lookpolymers.com All Rights Reserved