Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

International Mold Steel PX5 Pre-Hardened Mold Steel (P20 Type)

Category Metal , Ferrous Metal , Tool Steel , Mold Steel
Manufacturer International Mold Steel
Trade Name
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF International Mold Steel PX5 Pre-Hardened Mold Steel (P20 Type).pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
PX5 is a modified P20, high performance, high precision, mold steel. Unique Characteristics: Exceptionally clean steel with uniform microstructure – no pin holes, inclusions or hard spots. 30-33 HRc hardness.Uniform hardness throughout, even in heavy sections.75% tougher than typical chrome-moly steels.Patented chemistry suppresses weld cracking and hardness elevation in the heat affected zone, eliminating the need for pre-heating and post-heating in most welding situations.Machines 30-50% faster than any other P20-type steel.Never needs stress relieving, even after heavy machining.Applications:plastic moldsrubber moldspress platensdiesInformation provided by International Mold Steel.
Mechanical Properties Metric English Comments
Hardness, Rockwell C 30 - 33
30 - 33
Tensile Strength, Ultimate 961 MPa
139000 psi
at Center, Transverse
961 MPa
139000 psi
at Center, Longitudinal
981 MPa
142000 psi
at Surface, Longitudinal
981 MPa
142000 psi
at Surface, Transverse
Tensile Strength, Yield 843 MPa
122000 psi
at Center, Longitudinal
843 MPa
122000 psi
at Center, Transverse
863 MPa
125000 psi
at Surface, Transverse
863 MPa
125000 psi
at Surface, Longitudinal
Impact 4.6
4.6
(kgf m/cm<sup>2</sup>), Impact Toughness at Center, Transverse
4.8
4.8
(kgf m/cm<sup>2</sup>), Impact Toughness at Surface, Transverse
6.7
6.7
(kgf m/cm<sup>2</sup>), Impact Toughness at Center, Longitudinal
8.2
8.2
(kgf m/cm<sup>2</sup>), Impact Toughness at Surface, Longitudinal
Thermal Properties Metric English Comments
CTE, linear 11.9 µm/m-°C

@Temperature 30.0 - 100 °C
 6.60 µin/in-°F

@Temperature 86.0 - 212 °F
12.8 µm/m-°C

@Temperature 30.0 - 200 °C
 7.10 µin/in-°F

@Temperature 86.0 - 392 °F
13.1 µm/m-°C

@Temperature 30.0 - 300 °C
 7.30 µin/in-°F

@Temperature 86.0 - 572 °F
13.5 µm/m-°C

@Temperature 30.0 - 400 °C
 7.50 µin/in-°F

@Temperature 86.0 - 752 °F
14.0 µm/m-°C

@Temperature 30.0 - 600.0 °C
 7.80 µin/in-°F

@Temperature 86.0 - 1112 °F
Specific Heat Capacity 0.473 J/g-°C

@Temperature 20.0 °C
 0.113 BTU/lb-°F

@Temperature 68.0 °F
0.490 J/g-°C

@Temperature 100 °C
 0.117 BTU/lb-°F

@Temperature 212 °F
0.544 J/g-°C

@Temperature 200 °C
 0.130 BTU/lb-°F

@Temperature 392 °F
0.561 J/g-°C

@Temperature 300 °C
 0.134 BTU/lb-°F

@Temperature 572 °F
0.628 J/g-°C

@Temperature 400 °C
 0.150 BTU/lb-°F

@Temperature 752 °F
Thermal Conductivity 38.76 W/m-K

@Temperature 400 °C
 269.0 BTU-in/hr-ft²-°F

@Temperature 752 °F
39.20 W/m-K

@Temperature 300 °C
 272.0 BTU-in/hr-ft²-°F

@Temperature 572 °F
42.03 W/m-K

@Temperature 200 °C
 291.7 BTU-in/hr-ft²-°F

@Temperature 392 °F
42.34 W/m-K

@Temperature 100 °C
 293.8 BTU-in/hr-ft²-°F

@Temperature 212 °F
42.42 W/m-K

@Temperature 20.0 °C
 294.4 BTU-in/hr-ft²-°F

@Temperature 68.0 °F
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved