POLYMER SEARCH

Ineos T50-4400 HDPE

Category	Polymer , Thermoplastic , Polyethylene (PE) , HDPE
Manufacturer	Ineos Olefins & Polymers USA
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Ineos T50-4400 HDPE.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Ineos T50-4400 is a high-flow high density polyethylene copolymer intended for injection molding of thin wall containers. This material will allow for cycle time reduction while still imparting reasonable impact strength. This resin meets the Food and Drug Administration requirements of 21CFR 177.1520.

Physical Properties	Metric	English	Comments
Density	0.951 g/cc	0.0344 lb/inÂ³	ASTM D4883
Melt Flow	47 g/10 min @Load 2.16 kg, Temperature 190 Â°C	47 g/10 min @Load 4.76 lb, Temperature 374 Â°F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	65	65	ASTM D2240
Tensile Strength, Yield	25.5 MPa	3700 psi	2 in/min (50 mm/min); ASTM D-638
Flexural Modulus	1.207 GPa	175.1 ksi	Tangent-Method 1; ASTM D790
Izod Impact, Notched	0.200 J/cm	0.375 ft-lb/in	ASTM D256

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	74.0 Â°C	165 Â°F	ASTM D648
Vicat Softening Point	120 Â°C	248 Â°F	ASTM D1525
Brittleness Temperature	<= -75.0 Â°C	<= -103 Â°F	ASTM D746

Descriptive Properties	Value	Comments
Process	Injection Molding
Region	US & Canada	Bamberger Polymers Distribution

Users viewing this material also viewed the following: