Ineos ABS Lustran® QE 1110, Extrusion Grade (discontinued **)

Category	Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS), Extruded
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Ineos ABS Lustran® QE 1110, Extrusion Grade (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Extrusion grade, for coextrusion to surfaces with extreme low gloss.Information provided by Bayer.LANXESS was spun-off from Bayer in early 2005. Business renamed Ineos ABS after INEOS acquires a majority shareholding under a JV with Lanxess in 2007. Subsequently Ineos acquired 100% of Ineos ABS.

Physical Properties	Metric	English	Comments
Density	1.05 g/cc	0.0379 lb/in³
Melt Flow	3.0 g/10 min @Load 10.0 kg, Temperature 220 °C	3.0 g/10 min @Load 22.0 lb, Temperature 428 °F

Mechanical Properties	Metric	English
Tensile Strength, Yield	32.0 MPa	4640 psi
Elongation at Yield	2.0 %	2.0 %
Tensile Modulus	1.80 GPa	261 ksi
Charpy Impact Unnotched	1.00 J/cm² @Temperature -30.0 °C	4.76 ft-lb/in² @Temperature -22.0 °F
Charpy Impact, Notched	2.10 J/cm²	9.99 ft-lb/in²

Thermal Properties	Metric	English
CTE, linear, Parallel to Flow	90.0 µm/m-°C @Temperature 20.0 °C	50.0 µin/in-°F @Temperature 68.0 °F
Vicat Softening Point	97.0 °C	207 °F
Flammability, UL94	HB @Thickness 1.60 mm	HB @Thickness 0.0630 in

Electrical Properties	Metric	English	Comments
Surface Resistance	1.00e+15 ohm	1.00e+15 ohm

Users viewing this material also viewed the following: