- HOME
- POLYMER SEARCH
- T S40000 Series Stainless Steel
- Industeel SOLEIL C5 13% Cr 4 Ni Martensitic Stainless Steel with Improved Toughness
Industeel SOLEIL C5 13% Cr 4 Ni Martensitic Stainless Steel with Improved Toughness
| Category | Metal , Ferrous Metal , Martensitic , Stainless Steel , T S40000 Series Stainless Steel |
| Manufacturer | Groupe Arcelor |
| Trade Name | SOLEIL |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Industeel SOLEIL C5 13% Cr 4 Ni Martensitic Stainless Steel with Improved Toughness.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: Soleil C5 is a 13% Cr 4 Ni 0.5 Mo martensitic stainless steel. Its nickel content, associated with low carbon ensures better weldability, ductility, impact resistance and fatigue resistance properties when compared to 13 Cr ferritic-martensitic grades (AISI 410-420/Euronorms 1.4000 X6 Cr 13). The alloy has good corrosion resistance to fresh water and performs well under erosion-corrosion phenomena. The alloy is specially designed for all applications requiring high mechanical properties combined with high toughness and may be used in medium corrosive conditions. Typical applications are shafts or compressor impellers, particularly for hydraulic applications.Information provided by manufacturer.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 7.70 g/cc | 0.278 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Brinell | 220 - 320 | 220 - 320 | Typical |
| Tensile Strength, Ultimate | 750 - 950 MPa | 109000 - 138000 psi | Minimum Guaranteed |
| Tensile Strength, Yield | >= 560 MPa | >= 81200 psi | Minimum Guaranteed |
| >= 580 MPa @Strain 1.00 % |
>= 84100 psi @Strain 1.00 % |
||
| Elongation at Break | >= 18 % | >= 18 % | |
| Modulus of Elasticity | 206 GPa | 29900 ksi | |
| Poissons Ratio | 0.288 | 0.288 | Calculated |
| Shear Modulus | 80.0 GPa @Temperature 20.0 °C |
11600 ksi @Temperature 68.0 °F |
|
| Charpy Impact | >= 80.0 J | >= 59.0 ft-lb | |
| 100 J | 73.8 ft-lb | Typical | |
| >= 60.0 J @Temperature 0.000 °C |
>= 44.3 ft-lb @Temperature 32.0 °F |
||
| 80.0 J @Temperature 0.000 °C |
59.0 ft-lb @Temperature 32.0 °F |
Typical |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 11.0 µm/m-°C @Temperature 0.000 - 100 °C |
6.11 µin/in-°F @Temperature 32.0 - 212 °F |
|
| 12.0 µm/m-°C @Temperature 0.000 - 400 °C |
6.67 µin/in-°F @Temperature 32.0 - 752 °F |
||
| Specific Heat Capacity | 0.460 J/g-°C @Temperature 20.0 °C |
0.110 BTU/lb-°F @Temperature 68.0 °F |
|
| Thermal Conductivity | 26.0 W/m-K @Temperature 20.0 °C |
180 BTU-in/hr-ft²-°F @Temperature 68.0 °F |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Carbon, C | 0.040 % | 0.040 % | |
| Chromium, Cr | 13 % | 13 % | |
| Iron, Fe | 82.039 % | 82.039 % | As remainder |
| Molybdenum, Mo | 0.50 % | 0.50 % | |
| Nickel, Ni | 4.0 % | 4.0 % | |
| Phosphorous, P | 0.020 % | 0.020 % | |
| Silicon, Si | 0.40 % | 0.40 % | |
| Sulfur, S | 0.0010 % | 0.0010 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.0000800 ohm-cm @Temperature 20.0 °C |
0.0000800 ohm-cm @Temperature 68.0 °F |
Users viewing this material also viewed the following:
- Lehmann & Voss LUVOCOM® 1850/CF/15/TF/10/EM PBT, with carbon fiber, PTFE, easy flowing
- SABIC Innovative Plastics LNP THERMOCOMP Noryl_FM3020 PPE+HIPS (Europe-Africa-Middle East)
- SK Chemicals SKYTHANE® U9081E Hardener
- Teknor Apex TruVis Esters™ TTDTM Tri-Tridecyl Trimellitate
- Total Lumicene® mPE M6040 S01 Metallocene Polyethylene, Cast Film
- ConocoPhillips Syncon® 32 Synthetic AW Hydraulic Fluid 32
- BASF Polyetheramine D 2000
- PolyOne Synprene® IT 086LFR Thermoplastic Elastomer - SBC (discontinued **)
- Axiall 22871 Coax & Telecom Flexible PVC
Copyright © lookpolymers.com All Rights Reserved