- HOME
- POLYMER SEARCH
- Austenitic
- Industeel SIRIUS 314 25% Cr - 1.8% Si Heat Resistant Stainless Steel
Industeel SIRIUS 314 25% Cr - 1.8% Si Heat Resistant Stainless Steel
| Category | Metal , Ferrous Metal , Austenitic , Stainless Steel , T 300 Series Stainless Steel |
| Manufacturer | Groupe Arcelor |
| Trade Name | SIRIUS |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Industeel SIRIUS 314 25% Cr - 1.8% Si Heat Resistant Stainless Steel.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: CLI SIRIUS 314 grade is a fully austenitic stainless steel containing 25% Cr, 20% Ni and 1.8% Si. The alloy is designed for high temperature corrosion resistance applications even in severe conditions. Carbon additions are optimized in order to increase creep properties and mechanical properties. The alloy is well designed for applications up to 1150°C (2102°F) in oxidizing atmospheres, or up to 1050°C (2012°F) in reducing atmospheres. Sulphur, carbon or nitrogen pick up reduce the behavior of the steel. The alloy performs better than Sirius 310 or Sirius 253 grades in most of the applications.Information provided by manufacturer.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 7.90 g/cc | 0.285 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 600 MPa | 87000 psi | Typical after Solution Annealing |
| Tensile Strength, Yield | 285 MPa @Strain 0.200 % |
41300 psi @Strain 0.200 % |
Typical after Solution Annealing |
| 305 MPa @Strain 1.00 % |
44200 psi @Strain 1.00 % |
Typical after Solution Annealing | |
| Elongation at Break | 45 % | 45 % | Typical |
| Creep Strength | 130 MPa @Temperature 600 °C, Time 3.60e+6 sec |
18900 psi @Temperature 1110 °F, Time 1000 hour |
|
| Modulus of Elasticity | 200 GPa | 29000 ksi | |
| Poissons Ratio | 0.333 | 0.333 | Calculated |
| Shear Modulus | 75.0 GPa @Temperature 20.0 °C |
10900 ksi @Temperature 68.0 °F |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 16.0 µm/m-°C @Temperature 20.0 - 100 °C |
8.89 µin/in-°F @Temperature 68.0 - 212 °F |
|
| 17.0 µm/m-°C @Temperature 20.0 - 200 °C |
9.44 µin/in-°F @Temperature 68.0 - 392 °F |
||
| 18.0 µm/m-°C @Temperature 20.0 - 400 °C |
10.0 µin/in-°F @Temperature 68.0 - 752 °F |
||
| 18.5 µm/m-°C @Temperature 20.0 - 600 °C |
10.3 µin/in-°F @Temperature 68.0 - 1110 °F |
||
| Specific Heat Capacity | 0.500 J/g-°C @Temperature 20.0 °C |
0.120 BTU/lb-°F @Temperature 68.0 °F |
|
| Thermal Conductivity | 14.0 W/m-K @Temperature 20.0 °C |
97.2 BTU-in/hr-ft²-°F @Temperature 68.0 °F |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Carbon, C | <= 0.15 % | <= 0.15 % | |
| Chromium, Cr | 25 % | 25 % | |
| Iron, Fe | 53.05 - 53.2 % | 53.05 - 53.2 % | As remainder |
| Nickel, Ni | 20 % | 20 % | |
| Silicon, Si | 1.8 % | 1.8 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.0000950 ohm-cm @Temperature 20.0 °C |
0.0000950 ohm-cm @Temperature 68.0 °F |
Users viewing this material also viewed the following:
- PolyOne Geon™ Vinyl Wire & Cable WEJB400L Polyvinyl Chloride, Flexible (PVC, Flexible)
- Techmer ES HiFill® PP 0096 S2 LE Polypropylene
- Silberline Sparkle Silver® 7000-AR
- Teknor Apex APEX® 01-A0402C-112 Polyvinyl Chloride, Semi-Rigid
- SCG Chemicals EL-Proâ„¢ P400S Polypropylene Flat Yarn/Sheet
- A. Schulman PP 3052X-01 Polypropylene Impact Resistant Copolymer
- A. Schulman SCHULADUR® A GF50 50% Glass Fiber Reinforced PBT
- UBE P7115U Electronic Grade Nylon Copolymer Powder
- ChevronTexaco Taro® 40 XL SAE 40
- SABIC Innovative Plastics LNP VERTON RX06479 PA 66
Copyright © lookpolymers.com All Rights Reserved