Industeel CLC 18.10 LN Nitrogen Containing 18Cr-10Ni Austenitic Stainless Steel

Category	Metal , Ferrous Metal , Austenitic , Stainless Steel , T S30000 Series Stainless Steel
Manufacturer	Groupe Arcelor
Trade Name	CLC
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Industeel CLC 18.10 LN Nitrogen Containing 18Cr-10Ni Austenitic Stainless Steel.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Description: CLC 18.10LN is a 18Cr-10Ni austenitic stainless steel with specific Nitrogen additions. Its low carbon content avoids intergranular corrosion, even on welded pieces without an ulterior water quenching. Alloys CLC 18.10LN exhibits an austenitic microstructure free of deleterious carbide precipitations at grain boundaries. The grade contains some residual ferrite (=2%) after solution annealing (1050 - 1150Â°C / 1922 - 2102 Â°F) and water quenching. Nitrogen alloying :improves tensile properties at room and moderate temperaturesimproves structure stability of austenite at very low temperature or under severe cold deformationsdoes not affect weldability or fabricabilityimproves localized corrosion resistant propertiesTypical applications are food processing industry, chemical industry.Tensile properties after water quenching.Information provided by manufacturer.

Physical Properties	Metric	English	Comments
Density	7.90 g/cc	0.285 lb/inÂ³

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	570 MPa	82700 psi
Tensile Strength, Yield	>= 270 MPa @Strain 0.200 %	>= 39200 psi @Strain 0.200 %
	>= 310 MPa @Strain 1.00 %	>= 45000 psi @Strain 1.00 %
Elongation at Break	40 %	40 %
Creep Strength	205 MPa @Temperature 600 Â°C, Time 3.60e+6 sec	29700 psi @Temperature 1110 Â°F, Time 1000 hour
Modulus of Elasticity	200 GPa @Temperature 20.0 - 100 Â°C	29000 ksi @Temperature 68.0 - 212 Â°F
Poissons Ratio	0.299	0.299	Calculated
Shear Modulus	77.0 GPa @Temperature 20.0 - 100 Â°C	11200 ksi @Temperature 68.0 - 212 Â°F
Charpy Impact	>= 180 J	>= 133 ft-lb
	>= 62.0 J @Temperature -253 Â°C	>= 45.7 ft-lb @Temperature -423 Â°F

Thermal Properties	Metric	English
CTE, linear	16.0 Âµm/m-Â°C @Temperature 20.0 - 100 Â°C	8.89 Âµin/in-Â°F @Temperature 68.0 - 212 Â°F
	16.5 Âµm/m-Â°C @Temperature 20.0 - 200 Â°C	9.17 Âµin/in-Â°F @Temperature 68.0 - 392 Â°F
	17.0 Âµm/m-Â°C @Temperature 20.0 - 300 Â°C	9.44 Âµin/in-Â°F @Temperature 68.0 - 572 Â°F
	18.0 Âµm/m-Â°C @Temperature 20.0 - 500 Â°C	10.0 Âµin/in-Â°F @Temperature 68.0 - 932 Â°F
Specific Heat Capacity	0.500 J/g-Â°C @Temperature 20.0 - 100 Â°C	0.120 BTU/lb-Â°F @Temperature 68.0 - 212 Â°F
Thermal Conductivity	15.0 W/m-K @Temperature 20.0 - 100 Â°C	104 BTU-in/hr-ftÂ²-Â°F @Temperature 68.0 - 212 Â°F

Component Elements Properties	Metric	English	Comments
Carbon, C	0.020 %	0.020 %
Chromium, Cr	18.4 %	18.4 %
Iron, Fe	71.94 %	71.94 %	As remainder
Nickel, Ni	9.5 %	9.5 %
Nitrogen, N	0.14 %	0.14 %

Electrical Properties	Metric	English	Comments
Electrical Resistivity	0.0000730 ohm-cm @Temperature 20.0 - 100 Â°C	0.0000730 ohm-cm @Temperature 68.0 - 212 Â°F

Users viewing this material also viewed the following: