- HOME
- POLYMER SEARCH
- Thermoset
- Polyurethane, TS
- ITW Devcon Flexane® Rubber Repair / Castable Urethane 94 Liquid, Black
ITW Devcon Flexane® Rubber Repair / Castable Urethane 94 Liquid, Black
| Category | Polymer , Adhesive , Thermoset , Polyurethane, TS |
| Manufacturer | ITW Devcon |
| Trade Name | Flexane® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | ITW Devcon Flexane® Rubber Repair / Castable Urethane 94 Liquid, Black.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by ITW Devcon
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.04 g/cc | 0.0377 lb/in³ | |
| Viscosity | 6000 cP | 6000 cP | Mixed Viscosity |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 97 | 97 | Cured; ASTM D2240 |
| Tensile Strength at Break | 19.3 MPa | 2800 psi | ASTM D412 |
| Elongation at Break | <= 500 % | <= 500 % | ASTM D412 |
| Tear Strength | 72.7 kN/m | 415 pli | ASTM D624 |
| Taber Abrasion, mg/1000 Cycles | 330 | 330 | H-18 wheel (1000 gram load) |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 48.9 °C | 120 °F | wet |
| 82.2 °C | 180 °F | dry | |
| Shrinkage | 0.14 % | 0.14 % | Cured; ASTM D2566 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Strength | 13.8 kV/mm | 350 kV/in | ASTM D149 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 960 min | 16.0 hour | Functional cure |
| Pot Life | 10.0 min @Temperature 23.9 °C |
10.0 min @Temperature 75.0 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Coverage per pound, in² @ 1/4" thickness | 106 | |
| Demolding Time, hours | 5 | |
| Mix ratio by weight (Resin:Hardener) | 69:31 |
Users viewing this material also viewed the following:
- Pyrotek G-2 Low-Temperature Felt
- Ensinger ENSIFONE® PSU (Polysulfone) - Extruded Products (discontinued **)
- FloMet 17-4PH Stainless Steel, Heat Treated (H-900)
- Menzolit Menzolit® SMC 1800 Unsaturated Polyester UP
- Techmer ES Electrafil® ABS-1200/SD/FR BL ABS
- Samsung Cheil Industries Infino® GP-5300G PBT, Glass Filled
- ThyssenKrupp PAS 700 Structural Steel for Cold Forming
- Lubrizol ESTALOC® 59300 Ester-Type, Reinforced Engineering Thermoplastic (European Grade)
- BASF Ultramid® 66 H2 G/35-V0KB NAT 0046 35% Glass Filled PA66 (Dry)
- PolyOne Synprene® RT-3740 Thermoplastic Elastomer - SBC, Mineral Filled (discontinued **)
Copyright © lookpolymers.com All Rights Reserved