- HOME
- POLYMER SEARCH
- Thermoset
- Epoxy
- ITW Devcon Epoxy HP 250, Straw
ITW Devcon Epoxy HP 250, Straw
| Category | Polymer , Adhesive , Thermoset , Epoxy |
| Manufacturer | ITW Devcon |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | ITW Devcon Epoxy HP 250, Straw.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by ITW Devcon
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Viscosity | 105000 cP | 105000 cP | Mixed Viscosity |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Elongation at Break | 25 % | 25 % | |
| Adhesive Bond Strength | 22.1 MPa | 3200 psi | lap shear (on grit blasted steel, bond line thickness of 0.010"); ASTM D1002 |
| Tensile Impact Strength | 25.2 kJ/m² | 12.0 ft-lb/in² | |
| Peel Strength | 6.14 - 7.01 kN/m | 35.0 - 40.0 pli |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 121 °C | 250 °F | dry |
| Minimum Service Temperature, Air | -55.0 °C | -67.0 °F | dry |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 65.0 min | 1.08 hour | Working time |
| 300 min | 5.00 hour | Fixture time | |
| 1440 min | 24.0 hour | Functional cure |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Mix ratio (Resin:Hardener) | 2:1 |
Users viewing this material also viewed the following:
- SABIC Innovative Plastics GELOY HRA222F ASA+PC (Europe-Africa-Middle East)
- Mitsui AURUM® JCF3030 Polyimide, Carbon Fiber/PTFE Filled (discontinued **)
- A. Schulman PP 1188-01 Polypropylene Extra High-Impact Polypropylene
- A. Schulman POLYFORT™ FPP 3707 CAC03 Filled Homopolymer Polypropylene
- Eurofoam Siliconcell SIL 411 Silicone Foam Sheet
- Buckeye Polymers BP RPP 5012 C Polypropylene, 50% Mineral Filled
- ACC EP AOSR EPI Engineered Polymers Acrylic Oligomer
- ConocoPhillips Hydroclear® 10 Rolling Oil
- NOVA Chemicals Sclair® 2915 HDPE Injection Molding Resin (discontinued **)
Copyright © lookpolymers.com All Rights Reserved