- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Polyurethane TPE
- Huntsman IROGRAN® A 92 E 5670 FCM Ester-Based TPU-For Food Contact
Huntsman IROGRAN® A 92 E 5670 FCM Ester-Based TPU-For Food Contact
| Category | Polymer , Thermoplastic , Elastomer, TPE , Polyurethane TPE , Polyurethane, TP , Thermoplastic Polyurethane, Elastomer, Polyester Grade |
| Manufacturer | Huntsman Corporation |
| Trade Name | IROGRAN® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Huntsman IROGRAN® A 92 E 5670 FCM Ester-Based TPU-For Food Contact.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Introduction: IROGRAN A 92 E 5670 FCM is a thermoplastic polyester polyurethane for melt calendering. IROGRAN is part of the HUNTSMAN technical extrusion/injection molding product range and offers a specially designed, flexible material with a broad processing window. IROGRAN A 92 E 5670 FCM is a food contact material.Performance Features: High oil resistance High production rate Good melt flow Easy coloring Complies with FDA CFR 175.105 / 177.2600 Applications: Cable jacketing Tubing Technical extrusionInformation provided by Huntsman
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.20 g/cc | 1.20 g/cc | ASDTM D792 |
| Linear Mold Shrinkage | 0.0040 cm/cm | 0.0040 in/in | ASTM D955 |
| Melt Index of Compound | 62 g/10 min @Load 10.0 kg, Temperature 190 °C |
62 g/10 min @Load 22.0 lb, Temperature 374 °F |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 90 | 90 | ASTM D2240 |
| Hardness, Shore D | 38 | 38 | ASTM D2240 |
| Tensile Strength at Break | 40.0 MPa | 5800 psi | DIN 53504 |
| Elongation at Break | 570 % | 570 % | DIN 53504 |
| Compression Set | 25 % @Temperature 23.0 °C, Time 86400 sec |
25 % @Temperature 73.4 °F, Time 24.0 hour |
ASTM D395 |
| 40 % @Temperature 70.0 °C, Time 86400 sec |
40 % @Temperature 158 °F, Time 24.0 hour |
ASTM D395 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Feed Temperature | 195 °C | 383 °F | |
| Front Barrel Temperature | 205 °C | 401 °F | |
| Adapter Temperature | 210 °C | 410 °F | |
| Die Temperature | 210 °C | 410 °F | |
| Roll Temperature | 170 - 190 °C | 338 - 374 °F | Front, 32 rpm |
| 170 - 190 °C | 338 - 374 °F | Rear, 27 rpm |
Users viewing this material also viewed the following:
- PolyOne LubriOne™ PC-20CF/15T Polycarbonate (PC)
- Premix Thermoplastics PRE-ELEC® PP 1395
- Pau Tai Unistab BZ-5930 Calcium-Zinc/Barium-Zinc
- Master Bond MB300 Cyanoacrylate Adhesive System
- Dow C700-35 Polypropylene Resin
- DuPont Teijin Films Mylar® 822 Polyester Packaging Film, 48 Gauge
- Haynes Hastelloy® B-3® alloy, heat treated at 1065°C, rapid quenched
- LyondellBasell Higlass BJ62A Polypropylene Copolymer, 30% Glass Fiber
- PolyOne Elastamax™ HTE 1106 Styrene Butadiene Block Copolymer (SBC) (discontinued **)
Copyright © lookpolymers.com All Rights Reserved