- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyurethane, TP
- Thermoplastic Polyurethane (TPUR), Polyester Grade
- Huntsman AVALON® 85 ABX Thermoplastic Polyurethane
Huntsman AVALON® 85 ABX Thermoplastic Polyurethane
| Category | Polymer , Thermoplastic , Polyurethane, TP , Thermoplastic Polyurethane (TPUR), Polyester Grade |
| Manufacturer | Huntsman Corporation |
| Trade Name | Avalon® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Huntsman AVALON® 85 ABX Thermoplastic Polyurethane.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Introduction: AVALON 85 ABX is a high performance polyester based thermoplastic polyurethane for injection molding. AVALON 85 ABX is part of the AVALON Perform Range and offers a specially designed, flexible material with improved slip resistance and rubber-like properties, particularly suitable for thin outsoles. The features offered include:Improved processing Lower density Excellent surface definition Abrasion resistance Flex resistance Phthalate free TPUInformation provided by Alliance Polymers
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.15 g/cc | 0.0415 lb/in³ | DIN 53479 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 86 | 86 | DIN 53505 |
| Hardness, Shore D | 35 | 35 | DIN 53505 |
| Tensile Strength at Break | >= 25.0 MPa | >= 3630 psi | DIN 53504 |
| Elongation at Break | >= 600 % | >= 600 % | DIN 53504 |
| Tear Strength | >= 40.0 kN/m | >= 228 pli | DIN 53507 |
| Abrasion | <= 55 | <= 55 | mm<sup>3</sup>; DIN 53516 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Feed Temperature | 25.0 - 35.0 °C | 77.0 - 95.0 °F | |
| Rear Barrel Temperature | 175 - 195 °C | 347 - 383 °F | |
| Middle Barrel Temperature | 180 - 200 °C | 356 - 392 °F | |
| Front Barrel Temperature | 180 - 205 °C | 356 - 401 °F | |
| Nozzle Temperature | 175 - 200 °C | 347 - 392 °F | |
| Mold Temperature | 25.0 - 50.0 °C | 77.0 - 122 °F | |
| Injection Pressure | 2.00 - 10.0 MPa | 290 - 1450 psi | |
| Hold Pressure | 1.00 - 5.00 MPa | 145 - 725 psi | |
| Back Pressure | 0.0300 - 0.300 MPa | 4.35 - 43.5 psi | |
| Screw Speed | 20 - 80 rpm | 20 - 80 rpm |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Compression Ratio | 2-3:1 | |
| Flex Life | >100 k cycles | DIN 53522 T3 |
| L/D Ratio | 20-25:1 | |
| Typical Screw Diameter | 40-120 nm |
Users viewing this material also viewed the following:
- Plastcom SLOVALEN PC 81 T 20 PP, 20% mineral filling
- Ineos Nova 3601 General Purpose Crystal Polystyrene (discontinued **)
- Braskem BI 818 LDPE Injection Molding Polyethylene (discontinued **)
- Kazanorgsintez 273-83 High Density Polyethylene Composite
- Momentive Performance Materials Electro 170 Heat Cured Rubber - High Voltage Insulating
- Sharadaa Ceramics REFINSUL ZAP-017 Insulating Castables
- Terio Corporation TZY-8 Yttria Stabilized Zirconia
- Eurostar Star L PA6 D61 PA6, Injection Molded
- 3M Scotchcal™ ElectroCut™ 7725-139 Graphic Film
Copyright © lookpolymers.com All Rights Reserved