- HOME
- POLYMER SEARCH
- Adhesive
- Humiseal 1C61 UV Cure Conformal Coating
Humiseal 1C61 UV Cure Conformal Coating
| Category | Polymer , Adhesive , Thermoset |
| Manufacturer | Humiseal |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Humiseal 1C61 UV Cure Conformal Coating.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Humiseal 1C61 UV Cure Conformal CoatingHigh temperature resistanceGood dielectrical propertiesGood moisture resistanceRepairableUL Approval PendingMIL-I-46058C Approval PendingPasses thermal shock test (MIL-I-46058C)Flammability (self extinguishing) (ASTM D635)Good resistance to solvents (IPC CC 830)Recommended Stripper: 1090 Cure Type: UV
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.959 g/cc | 0.0346 lb/in³ | ASTM D1475 |
| Solids Content | 94 % | 94 % | Fed Std 141 Method 4044 |
| Volatile Organic Compounds (VOC) Content | 0.00 g/l | 0.00 g/l | |
| Viscosity | 300 cP | 300 cP | Fed Std Method 4287 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Modulus of Elasticity | 0.00452 GPa | 0.655 ksi |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 170 µm/m-°C @Temperature 20.0 °C |
94.4 µin/in-°F @Temperature 68.0 °F |
|
| Maximum Service Temperature, Air | 200 °C | 392 °F | |
| Minimum Service Temperature, Air | -65.0 °C | -85.0 °F | |
| Glass Transition Temp, Tg | >= 200 °C | >= 392 °F | |
| Flash Point | >= 37.8 °C | >= 100 °F | ASTM D56 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistance | 5.00e+10 ohm | 5.00e+10 ohm | Moisture Resistance; MIL-I-46058C |
| Insulation Resistance | 5.00e+14 ohm | 5.00e+14 ohm | Insulation Resistance; MIL-I-46058C |
| Dielectric Constant | 2.5 | 2.5 | ASTM D1 50 65T |
| Dielectric Breakdown | >= 1500 V | >= 1500 V | Dielectric Withstand; MIL-I-46058C |
| Dissipation Factor | 0.010 | 0.010 | ASTM D1 50 65T |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 0.167 - 0.333 min | 0.00278 - 0.00556 hour | Value given for curing at 300 W/in; Optimum properties in 24 hrs. |
| Shelf Life | 6.00 Month @Temperature 23.0 °C |
6.00 Month @Temperature 73.4 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Coverage | 750 ft²/gal |
Users viewing this material also viewed the following:
- Pacific Sintered Materials FN-253-T(HT) 4600 Powdered Metal
- Chevron Phillips 6335 LLDPE Cast/Blown Film Resin, Butene Copolymer (discontinued **)
- Materion BrushBronze® 95510 (AMS 4880) Centrifugal Cast 1.0" - 17.0"
- Shakespeare Resistat® F901 A013 Nylon 66 Monofilament
- Special Metals INCONEL® 686 Nickel Superalloy (UNS N06686) Sheet 0.062 in (1.6 mm)
- Sibur SKD 1st Grade Butadiene Rubber (BR)
- Samyang Trirex® 3030IR Polycarbonate
- Dow Corning 9045 Silicone Elastomer Blend
- Crucible Steel 446 Chromium Steel
- ATI Allegheny Ludlum Stainless Steel Free Machining Grade Type 416, Tempered at 704°C (UNS S41600)
Copyright © lookpolymers.com All Rights Reserved