- HOME
- POLYMER SEARCH
- Electronic/Magnetic Alloy
- Goodfellow Evanohm® Precision Resistance Nickel Alloy
Goodfellow Evanohm® Precision Resistance Nickel Alloy
| Category | Metal , Electronic/Magnetic Alloy , Nonferrous Metal , Nickel Alloy |
| Manufacturer | Goodfellow |
| Trade Name | Evanohm® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Goodfellow Evanohm® Precision Resistance Nickel Alloy.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Electrical resistance alloy with a very low temperature coefficient of resistivityInformation provided by Goodfellow.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 8.10 g/cc | 0.293 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 1210 MPa | 175000 psi | |
| Elongation at Break | <= 33 % | <= 33 % | |
| Tensile Modulus | 221 GPa | 32100 ksi | |
| Izod Impact, Unnotched | 0.420 - 1.00 J/cm | 0.787 - 1.87 ft-lb/in | Notch Status Unknown |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 11.7 µm/m-°C @Temperature 20.0 - 100 °C |
6.50 µin/in-°F @Temperature 68.0 - 212 °F |
|
| Thermal Conductivity | 14.6 W/m-K | 101 BTU-in/hr-ft²-°F | |
| Melting Point | 1340 - 1390 °C | 2440 - 2530 °F | |
| Solidus | 1340 °C | 2440 °F | |
| Liquidus | 1390 °C | 2530 °F | |
| Maximum Service Temperature, Air | 300 °C | 572 °F |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Aluminum, Al | 2.5 % | 2.5 % | |
| Chromium, Cr | 20 % | 20 % | |
| Copper, Cu | 2.5 % | 2.5 % | |
| Nickel, Ni | 75 % | 75 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.000134 ohm-cm | 0.000134 ohm-cm | Temperature Coefficient of 0.00001/K |
Users viewing this material also viewed the following:
- Nye Lubricants 1251 Grease
- LG Chemical LUCON PS4200 ABS+CF
- Intercontinental Polymers 131-02 PET Polymer Type - Semi-Dull, Flame Retardant, Polyester Pellets
- GRECO ISOTHANE 1170D Poly(adipate)ester TPUÂ Resin
- SABIC Innovative Plastics ULTEM CRS5311 PEI (Asia Pacific)
- Borealis Borcell™ LE1120 Low Density Polyethylene for Physically Foamed Cellular Insulation
- Zeon Chemicals Nipol® 1031 Nitrile Elastomer
- DSM Stanyl® TW371 (COND) Nylon 46 Heat Stabilized, PTFE Lubricated (North America)
- A. Schulman ComAlloy Hiloy® 626 Nylon 6/6, Glass/Mineral Reinforced
- Plenco 7591 Phenolic, Pellet, Transfer Molded
Copyright © lookpolymers.com All Rights Reserved