Ensinger Tecaform™ AH ID Metal Detectable Acetal Copolymer (POM)

Category	Polymer , Thermoplastic , Acetal (POM)
Manufacturer	Ensinger
Trade Name	Tecaform™
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Ensinger Tecaform™ AH ID Metal Detectable Acetal Copolymer (POM).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

TECAFORM™ AH ID is the fist commercially available acetal that is fully detectable by standard metal detection equipment. Exhibiting excellent machinability and a good combination of physical properties along with FDA compliance, TECAFORM AH ID is ideal for enhancing product safety in food processing applications.

Physical Properties	Metric	English	Comments
Specific Gravity	1.48 g/cc	1.48 g/cc	ASTM D790
Water Absorption	0.22 % @Time 86400 sec	0.22 % @Time 24.0 hour	ASTM D570
Water Absorption at Saturation	0.65 %	0.65 %	ASTM D570

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	86	86	ASTM D785
Tensile Strength, Yield	64.0 MPa	9280 psi	ASTM D638
Elongation at Break	25 %	25 %	ASTM D638
Tensile Modulus	2.80 GPa	406 ksi	ASTM D638
Flexural Strength	75.8 MPa	11000 psi	ASTM D790
Flexural Modulus	2.48 GPa	360 ksi	ASTM D790
Compressive Strength	31.0 MPa	4500 psi	ASTM D695
Izod Impact, Unnotched	0.534 J/cm	1.00 ft-lb/in	ASTM D256
Coefficient of Friction, Dynamic	0.21	0.21	40 psi, 50 fpm; ASTM D3702
K (wear) Factor	131 x 10^-8 mm³/N-M	65.0 x 10^-10 in³-min/ft-lb-hr	40 psi, 50 fpm
Limiting Pressure Velocity	0.0507 MPa-m/sec	1450 psi-ft/min	ASTM D792

Thermal Properties	Metric	English	Comments
CTE, linear	110 µm/m-°C	61.0 µin/in-°F	ASTM D696
Melting Point	165 °C	329 °F	ASTM D2133
Maximum Service Temperature, Air	100 °C	212 °F	Continuous; UL746B
	141 °C	285 °F	Intermittent
Deflection Temperature at 0.46 MPa (66 psi)	158 °C	316 °F	ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	110 °C	230 °F	ASTM D648
Flammability, UL94	HB	HB	UL 94

Electrical Properties	Metric	English	Comments
Surface Resistivity per Square	1.00e+12 ohm	1.00e+12 ohm	ASTM D257

Users viewing this material also viewed the following: