Ensinger TECATRON™ GF 40 Polyphenylene sulfide (PPS)

Category	Polymer , Thermoplastic , Polyphenylene Sulfide (PPS)
Manufacturer	Ensinger
Trade Name	TECATRON™
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Ensinger TECATRON™ GF 40 Polyphenylene sulfide (PPS).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

TECATRON PPS is a high performance thermoplastic that combines good mechanical properties with excellent thermal and chemical resistance properties. There is no known solvent that dissolves TECATRON PPS at temperatures below 392°F. Its low ionic impurities make it an excellent choice for applications where high purity is a concern. TECATRON GF40 is a glass reinforced material that offers extremely high strength along with excellent chemical resistance properties. TECATRON PVX is a bearing grade PPS that is suitable for high load applications.Information Provided by Ensinger Industries, Inc.

Physical Properties	Metric	English	Comments
Specific Gravity	1.64 g/cc	1.64 g/cc	ASTM D792
Density	1.64 g/cc	0.0592 lb/in³	ASTM D792
Water Absorption at Saturation	0.020 %	0.020 %	ASTM D570

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	184 MPa	26700 psi
Elongation at Break	1.9 %	1.9 %	ASTM D638
Tensile Modulus	14.0 GPa	2030 ksi	ASTM D638
Flexural Modulus	13.0 GPa	1890 ksi	ASTM D790

Thermal Properties	Metric	English	Comments
CTE, linear	18.0 µm/m-°C	10.0 µin/in-°F	ASTM D696
Specific Heat Capacity	1.18 J/g-°C	0.282 BTU/lb-°F
Thermal Conductivity	0.251 W/m-K	1.74 BTU-in/hr-ft²-°F
Melting Point	282 °C	540 °F	ASTM D2133
Maximum Service Temperature, Air	230 °C	446 °F	Long Term
	260 °C	500 °F	Intermittent
Deflection Temperature at 1.8 MPa (264 psi)	260 °C	500 °F	ASTM D648
Flammability, UL94	V-0	V-0

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+13 ohm-cm	1.00e+13 ohm-cm	ASTM D257
Surface Resistivity per Square	1.00e+15 ohm	1.00e+15 ohm	ASTM D257
Dielectric Constant	4.0	4.0	1 Mhz; ASTM D150
Dielectric Strength	20.0 kV/mm	508 kV/in	ASTM D149
Dissipation Factor	0.00010 @Temperature 22.8 °C	0.00010 @Temperature 73.0 °F	60 Hz; ASTM D150
	0.0040	0.0040	1 Mhz; ASTM D150

Users viewing this material also viewed the following: