Elektro-Isola Etronax MMF Phenolic, Cotton Fabric Reinforcement, Brown, Tubes

Category	Polymer , Thermoset , Phenolic
Manufacturer	Elektro-Isola
Trade Name	Etronax
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Elektro-Isola Etronax MMF Phenolic, Cotton Fabric Reinforcement, Brown, Tubes.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Description: Mechanical applications. Reinforced with finer fabric than Etronax MF. Can be used, in particular, for mechanical applications where fine tolerances and smoother surface finish are required.Applications: Ball-bearing cages for spindle bearings and guide rings for hydraulic cylinders.Information provided by Elektro-Isola

Physical Properties	Metric	English	Comments
Density	1.30 g/cc @Thickness >=0.000 mm	0.0470 lb/in³ @Thickness >=0.000 in	24hr/23°C/50% RH; ISO 1183-A; IEC/EN 61212-2 7.3
Water Absorption	0.20 %	0.20 %	24hr/50°C+24hr in water at 23°C; ISO 62-1; IEC/EN 61212-2 7.2

Mechanical Properties	Metric	English	Comments
Flexural Strength	100 MPa @Diameter >=100 mm	14500 psi @Diameter >=3.94 in	24hr/23°C/50% RH; ISO 178; IEC/EN 61212-2 5.1
Compressive Strength	170 MPa @Temperature 23.0 °C, Time 86400 sec	24700 psi @Temperature 73.4 °F, Time 24.0 hour	50% RH, Axial; ISO 604; IEC/EN 61212-2 5.2
Adhesive Bond Strength	130 MPa @Diameter <=100 mm	18900 psi @Diameter <=3.94 in	24hr/23°C/50% RH; IEC 60212-2; IEC/EN 61212-2 5.3

Thermal Properties	Metric	English	Comments
Maximum Service Temperature, Inert	100 °C @Thickness 3.00 mm, Time 7.20e+7 sec	212 °F @Thickness 0.118 in, Time 20000 hour	IEC 60695-11-10; IEC/EN 61212-2 7.1

Electrical Properties	Metric	English	Comments
Insulation Resistance	2.00e+8 ohm @Diameter 8.00 - 10.0 mm	2.00e+8 ohm @Diameter 0.315 - 0.394 in	24hr/50°C+24h in water at 23°C; IEC; IEC/EN 61212-2 6.2
Dielectric Strength	3.00 kV/mm @Thickness 3.00 mm	76.2 kV/in @Thickness 0.118 in	24hr/23°C/50% RH+1hr/oil 90°C; Perpendicular; IEC 60243-1; IEC/EN 61212-2 6.1.2.1
	0.800 kV/mm @Diameter >=3.00 mm	20.3 kV/in @Diameter >=0.118 in	24hr/23°C/50% RH+1hr/oil 90°C; Parallel; IEC 60243-1; IEC/EN 61212-2 6.1.2.1

Users viewing this material also viewed the following: