EVALCA EVAL® LC-H101BD Ethylene Vinyl Alcohol Copolymer Resin (discontinued **)

Category	Polymer , Film , Thermoplastic , Ethylene Vinyl Alcohol (EVOH)
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	EVALCA EVAL® LC-H101BD Ethylene Vinyl Alcohol Copolymer Resin (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

38 mol % Ethylene.Data provided by EVALCA. Applications: Blown film. EVOH is used in packaging applications because of its outstanding gas barrier properties.EVAL™ is now produced as a part of the Kuraray product line.

Physical Properties	Metric	English	Comments
Density	1.17 g/cc	0.0423 lb/in³	ASTM D1505
Moisture Vapor Transmission	0.820 cc-mm/m²-24hr-atm	2.08 cc-mil/100 in²-24hr-atm	40°C, 90% RH
Oxygen Transmission	0.0140 cc-mm/m²-24hr-atm	0.0356 cc-mil/100 in²-24hr-atm	20°C; 65% RH; Permeability increases significantly at higher moisture content.
Melt Flow	1.6 g/10 min @Load 2.16 kg, Temperature 190 °C	1.6 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D1238
	3.8 g/10 min @Load 2.16 kg, Temperature 210 °C	3.8 g/10 min @Load 4.76 lb, Temperature 410 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	95	95	ASTM D785
Tensile Strength, Yield	67.0 MPa	9720 psi	10%/min. ASTM D638
Film Elongation at Break, MD	250 %	250 %	Orientation not specified; ASTM D882
Elongation at Yield	6.0 %	6.0 %	10%/min. ASTM D638
Modulus of Elasticity	2.40 GPa	348 ksi	Youngs Modulus, ASTM D638, 10%/min.
Flexural Yield Strength	108 MPa	15700 psi	Bending Strength; ASTM D790
Flexural Modulus	3.10 GPa	450 ksi	Bending Elasticity; ASTM D790
Izod Impact, Notched	0.640 J/cm	1.20 ft-lb/in	ASTM D256
Taber Abrasion, mg/1000 Cycles	2.0	2.0	ASTM D1175
Film Tensile Strength at Break, MD	59.0 MPa	8560 psi	Orientation not specified; ASTM D882

Thermal Properties	Metric	English	Comments
CTE, linear	70.0 µm/m-°C	38.9 µin/in-°F	Below Tg
	120 µm/m-°C	66.7 µin/in-°F	Above Tg
Specific Heat Capacity	2.40 J/g-°C	0.574 BTU/lb-°F
Thermal Conductivity	0.340 W/m-K	2.36 BTU-in/hr-ft²-°F	For EVAL F101
Melting Point	175 °C	347 °F	DSC
Deflection Temperature at 0.46 MPa (66 psi)	90.0 °C	194 °F
Vicat Softening Point	165 °C	329 °F
Glass Transition Temp, Tg	62.0 °C	144 °F	Dynamic Viscoelasticity

Optical Properties	Metric	English	Comments
Haze	1.5 %	1.5 %	Film; ASTM D1003
Gloss	90 %	90 %	45°; Film; ASTM D2457

Electrical Properties	Metric	English	Comments
Dielectric Constant	5.4	5.4	Frequency Not Specified
Dissipation Factor	0.22	0.22	Frequency Not Specified

Processing Properties	Metric	English	Comments
Melt Temperature	<= 240 °C	<= 464 °F

Users viewing this material also viewed the following: