DuPont Performance Polymers Hytrel® G5564 TPC-ET (Unverified Data**)

Category	Polymer , Thermoplastic , Elastomer, TPE , Polyester, TP , Polyester Thermoplastic Elastomer
Manufacturer	DuPont Performance Polymers
Trade Name	Hytrel®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	DuPont Performance Polymers Hytrel® G5564 TPC-ET (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Hytrel® G5564 is a 55 nom. Shore D, heat stable, plasticiser free high viscosity resin for extrusion; low temperature impact resistance as well as excellent mechanical properties; good hydrocarbon resistance.Information provided by DuPont Performance Polymers

Physical Properties	Metric	English	Comments
Density	1.21 g/cc	0.0437 lb/in³	ISO 1183
Water Absorption	0.50 % @Temperature 23.0 °C	0.50 % @Temperature 73.4 °F	Equilibrium 50%RH; ISO 62
	1.5 % @Temperature 23.0 °C	1.5 % @Temperature 73.4 °F	Immersion 24h; ISO 62
	2.2 % @Temperature 23.0 °C	2.2 % @Temperature 73.4 °F	Saturation, immersed; ISO 62

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	54 @Time 15.0 sec	54 @Time 0.00417 hour	ISO 868
Tensile Strength at Break	30.0 MPa @Temperature 23.0 °C	4350 psi @Temperature 73.4 °F	ISO 527 (1BA bar)
Tensile Stress	7.50 MPa @Strain 5.00 %, Temperature 23.0 °C	1090 psi @Strain 5.00 %, Temperature 73.4 °F	ISO 527 (1BA bar)
	11.0 MPa @Strain 10.0 %, Temperature 23.0 °C	1600 psi @Strain 10.0 %, Temperature 73.4 °F	ISO 527 (1BA bar)
	16.0 MPa @Strain 50.0 %, Temperature 23.0 °C	2320 psi @Strain 50.0 %, Temperature 73.4 °F	ISO 527 (1BA bar)
Elongation at Break	>= 300 % @Temperature 23.0 °C	>= 300 % @Temperature 73.4 °F	nominal; ISO 527 (1BA bar)
	>= 300 % @Temperature 23.0 °C	>= 300 % @Temperature 73.4 °F	ISO 527 (1BA bar)
Tensile Modulus	0.210 GPa @Temperature 23.0 °C	30.5 ksi @Temperature 73.4 °F	ISO 527
Charpy Impact, Notched	1.70 J/cm² @Temperature -30.0 °C	8.09 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eA
	NB @Temperature 23.0 °C	NB @Temperature 73.4 °F	ISO 179/1eA

Thermal Properties	Metric	English	Comments
Melting Point	215 °C	419 °F	10°C/min; ISO 11357-1/-3

Processing Properties	Metric	English	Comments
Melt Temperature	230 °C	446 °F	Optimum; Extrusion
	225 - 245 °C	437 - 473 °F	Extrusion
Drying Temperature	100 °C	212 °F	Extrusion
Dry Time	2.00 - 3.00 hour	2.00 - 3.00 hour	Extrusion
Moisture Content	<= 0.080 %	<= 0.080 %	Extrusion

Descriptive Properties	Value	Comments
Generic	TPC-ET
Part Marking Code	>TPC-ET<	ISO 11469
Product Category	Extrusion Resins
Resin Identification	TPC-ET	ISO 1043

Users viewing this material also viewed the following: