- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- HDPE
- High Density Polyethylene (HDPE), Blow Molding Grade
- Amco PRIMATOP HDPE 004955HP Blow Molding Polyethylene
Amco PRIMATOP HDPE 004955HP Blow Molding Polyethylene
| Category | Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Blow Molding Grade |
| Manufacturer | Amco Plastic Materials |
| Trade Name | PRIMATOP |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Amco PRIMATOP HDPE 004955HP Blow Molding Polyethylene.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
HDPE 003955PZ features zinc stearate additive and is used for injection blow molding.Former A-Top Polymers product; part of Amco product line since 2013.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.954 g/cc | 0.0345 lb/in³ | ASTM D1505 |
| ESCR 100% Igepal® | 60 hour | 60 hour | Condition B, F50; ASTM D1693 |
| Melt Index of Compound | 0.35 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.35 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 28.3 MPa | 4100 psi | 2" per min, Type IV; ASTM D638 |
| Elongation at Break | >= 500 % | >= 500 % | 2" per min, Type IV; ASTM D638 |
| Flexural Modulus | 1.28 GPa | 185 ksi | ASTM D790 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Brittleness Temperature | <= -75.0 °C | <= -103 °F | ASTM D746 |
Users viewing this material also viewed the following:
- PTS Trimid® N66-100HL Heat Stabilized, Lubed Nylon 6/6
- Ravago Manufacturing Americas Hylon® N2033HL Nylon 6 (Cond)
- Trelleborg Emerson & Cuming Stycast® 2741LV/15LV Two-Component Easy Mix Ratio Encapsulant
- Hexcel® HexForce™ 7520 Fiber Glass Fabric
- DSM Arnite® T06 200 PBT (European and Asian Grade)
- CLAL-MSX NICLAFOR® 1000 TDX Quenched/Cold Rolled, Drawn Copper Alloy
- Clariant Renol 6608 HSL Nylon 66, High Impact Modified, Heat Stabilized, Lubricated
- Asahi Kasei Xyron® X0718 Modified Polyphenylene Ether
- Arlon 44430B020 0.020" (0.508 mm) Uncured Silicone Rubber with Fiberglass Substrate
Copyright © lookpolymers.com All Rights Reserved